Complete automatic hermetic sliding door with stainless leaf and operator

クリーンルームのドア、窓およびインターロックシステム

A 自動密閉スライドドア

A touchless automatic sliding doorset that lowers and compresses the leaf against full-perimeter seals during final closure to support pressure-critical sterile rooms.

Final Compression Closing Motion
Full-Perimeter Hermetic Seal
Touchless Automatic Access
Pressure-Stable Sterile Boundary

見積もりリクエスト製品案内

商品紹介

The Automatic Hermetic Sliding Door follows a shaped track that moves the leaf horizontally during travel and then draws it inward and downward at the final closing position. This movement compresses the head, jamb and threshold seals around the complete opening. A stainless-faced polyurethane-cored leaf provides a rigid gasket plane, while the monitored operator controls motion, obstruction reversal and hold-open time for beds, carts and personnel.

主要な特徴

A compound closing path actively compresses the leaf against all perimeter seals.

Touchless activation supports sterile transfer without shared handle contact.

Rigid stainless-faced construction preserves a straight sealing plane over repeated cycles.

Safety monitoring reverses the door if an obstruction is detected during closure.

Programmable speeds and hold-open time accommodate personnel, trolley and bed traffic.

お客様の製品に関する懸念事項

Hermetic sliding doors must compress uniformly after every cycle while remaining safe, touchless and practical for wide clinical or cleanroom traffic.

A conventional sliding leaf passes near the frame but does not compress the seals.The final inward-and-downward motion applies controlled pressure around the complete perimeter.

Floor, jamb and head leakage paths respond differently to ordinary brush seals.Matched compression gaskets close all four sides through one coordinated leaf movement.

A heavy sealed leaf can create a safety risk during powered closure.Position monitoring and obstruction detection command immediate reversal and low-speed recovery.

Slow sealed doors delay clinical beds and large cleanroom carts.Adjustable travel and hold-open settings match the clear opening to the expected traffic type.

典型的な用途

Operating theatresSterile pharmaceutical suitesIsolation and intensive-care roomsHigh-grade cleanroom airlocksPressure-controlled biomedical laboratories

技術的なパラメータ

Representative physical dimensions for an automatic hermetic sliding doorset are listed below.

コア材料	Closed-cell rigid polyurethane foam with internal reinforcement
パネルの厚さ	40-50 mm hermetic sliding leaf
有効幅	800-2500 mm clear opening
最大長さ	2400 mm standard leaf height
鋼鉄の厚さを直面する	0.8-1.0 mm 304 stainless or powder-coated steel skins
コア密度	40-45 kg/m³ polyurethane
熱伝導率	0.022-0.028 W/(m·K) typical polyurethane core range
表面仕上げ	Brushed 304 stainless steel or smooth powder-coated steel
ジョイントタイプ	Shaped overhead track with final inward/downward leaf compression against four-side gaskets
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Touchless hand, foot or radar activationBattery backup and manual releaseFlush double-glazed vision panelInterlock and access-control integration

Planning a Automatic Hermetic Sliding Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する