İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hava Dağıtım Sistemleri
Ayarlanabilir Disc Air Valve
A compact circular wall or ceiling valve whose threaded center disc adjusts the annular opening for balancing small supply or extract airflows.
- Continuously Adjustable Annulus
- Compact Circular Face
- Threaded Locking Disc
- Wall or Ceiling Mounting
Ürün tanıtımı
The adjustable disc air valve provides a simple terminal for small branch airflows in cleanroom support rooms, toilets and service spaces. Turning the central steel disc changes the annular free area and therefore the pressure drop through the valve; a lock nut secures the selected position after balancing. The formed casing fits a standard round duct sleeve, and spring or bayonet retainers allow the complete valve to be removed for cleaning. Supply versions discharge radially across the wall or ceiling, while extract versions draw air evenly around the perimeter gap.
Ana Özellikler
A lock nut holds the balanced setting so routine wiping does not change the annular gap.
The rounded powder-coated face presents a compact cleanable terminal for small rooms.
Standard 100–200 mm spigots connect directly to circular duct sleeves without a separate plenum.
Müşteri Ürün Sorunları
A small air terminal must provide usable balancing adjustment without a bulky plenum or exposed damper handle.
A fixed circular outlet cannot be balanced after the branch duct is installed.Rotating the center disc changes the annular airway until the measured volume reaches the intended value.
Cleaning staff accidentally change the final air-valve setting.The selected disc position is secured with a hidden spindle lock nut behind the face.
A large grille looks disproportionate in a narrow support-room ceiling.Compact 100–200 mm nominal sizes provide a restrained circular room-side appearance.
The duct sleeve becomes inaccessible behind a fixed valve.Spring or bayonet mounting allows the complete valve body to withdraw for inspection and cleaning.
Tipik uygulamalar
Cleanroom support-room extractGowning-room ceiling exhaustJanitor and clean utility roomsSmall laboratory support branchesControlled corridor supply or relief air
Teknik parametreler
Typical dimensions and materials for an adjustable supply or extract disc valve are listed below.
| Temel malzemeler | Formed sheet-steel valve casing and disc with galvanized threaded spindle, crossbar and lock nut |
|---|---|
| Panel kalınlığı | 0.8–1.2 mm formed steel valve casing and disc |
| Effective Width (Etkili Genişlik) | 132–245 mm overall visible face diameter |
| Maksimum uzunluk | Up to 245 mm overall face diameter for nominal size 200 |
| Çelik yüz yüze kalınlığı | 0.8–1.2 mm powder-coated steel face |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ for the steel valve casing and disc |
| Termal İletkenlik | Approximately 45–60 W/(m·K) for the steel valve casing and disc |
| Yüzey bitirme | Smooth white powder coating similar to RAL 9010 with galvanized concealed hardware |
| Ortak tip | Spring or bayonet fit to a Ø100–200 mm duct sleeve with threaded adjustable disc |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Supply-air radial discharge profileExtract-air valve profileNominal sizes 100, 125, 160 and 200 mmWhite powder coat or stainless-steel finish
Planning a Adjustable Disc Air Valve specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
