English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы распределения воздуха в чистых помещениях
Регулируемый дисковый клапан воздуха
A compact circular wall or ceiling valve whose threaded center disc adjusts the annular opening for balancing small supply or extract airflows.
- Continuously Adjustable Annulus
- Compact Circular Face
- Threaded Locking Disc
- Wall or Ceiling Mounting
Введение продукции
The adjustable disc air valve provides a simple terminal for small branch airflows in cleanroom support rooms, toilets and service spaces. Turning the central steel disc changes the annular free area and therefore the pressure drop through the valve; a lock nut secures the selected position after balancing. The formed casing fits a standard round duct sleeve, and spring or bayonet retainers allow the complete valve to be removed for cleaning. Supply versions discharge radially across the wall or ceiling, while extract versions draw air evenly around the perimeter gap.
Основные характеристики
A lock nut holds the balanced setting so routine wiping does not change the annular gap.
The rounded powder-coated face presents a compact cleanable terminal for small rooms.
Standard 100–200 mm spigots connect directly to circular duct sleeves without a separate plenum.
Обеспокоенность клиентов продуктами
A small air terminal must provide usable balancing adjustment without a bulky plenum or exposed damper handle.
A fixed circular outlet cannot be balanced after the branch duct is installed.Rotating the center disc changes the annular airway until the measured volume reaches the intended value.
Cleaning staff accidentally change the final air-valve setting.The selected disc position is secured with a hidden spindle lock nut behind the face.
A large grille looks disproportionate in a narrow support-room ceiling.Compact 100–200 mm nominal sizes provide a restrained circular room-side appearance.
The duct sleeve becomes inaccessible behind a fixed valve.Spring or bayonet mounting allows the complete valve body to withdraw for inspection and cleaning.
Типичные приложения
Cleanroom support-room extractGowning-room ceiling exhaustJanitor and clean utility roomsSmall laboratory support branchesControlled corridor supply or relief air
Технические параметры
Typical dimensions and materials for an adjustable supply or extract disc valve are listed below.
| Основной материал | Formed sheet-steel valve casing and disc with galvanized threaded spindle, crossbar and lock nut |
|---|---|
| Толщина панели | 0.8–1.2 mm formed steel valve casing and disc |
| эффективная ширина | 132–245 mm overall visible face diameter |
| Максимальная длина | Up to 245 mm overall face diameter for nominal size 200 |
| Толщина линий стали | 0.8–1.2 mm powder-coated steel face |
| Плотность ядра | Approximately 7850 kg/m³ for the steel valve casing and disc |
| Теплопроводимость | Approximately 45–60 W/(m·K) for the steel valve casing and disc |
| Поверхностная отделка | Smooth white powder coating similar to RAL 9010 with galvanized concealed hardware |
| Объединенный тип | Spring or bayonet fit to a Ø100–200 mm duct sleeve with threaded adjustable disc |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Supply-air radial discharge profileExtract-air valve profileNominal sizes 100, 125, 160 and 200 mmWhite powder coat or stainless-steel finish
Planning a Adjustable Disc Air Valve specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
