White adjustable disc air valve with circular steel face

クリーンルーム空気分配システム

調節可能なディスク空気弁

A compact circular wall or ceiling valve whose threaded center disc adjusts the annular opening for balancing small supply or extract airflows.

Continuously Adjustable Annulus
Compact Circular Face
Threaded Locking Disc
Wall or Ceiling Mounting

見積もりリクエスト製品案内

商品紹介

The adjustable disc air valve provides a simple terminal for small branch airflows in cleanroom support rooms, toilets and service spaces. Turning the central steel disc changes the annular free area and therefore the pressure drop through the valve; a lock nut secures the selected position after balancing. The formed casing fits a standard round duct sleeve, and spring or bayonet retainers allow the complete valve to be removed for cleaning. Supply versions discharge radially across the wall or ceiling, while extract versions draw air evenly around the perimeter gap.

主要な特徴

The threaded center disc provides continuous rather than stepped adjustment of the airflow opening.

A lock nut holds the balanced setting so routine wiping does not change the annular gap.

The rounded powder-coated face presents a compact cleanable terminal for small rooms.

Standard 100–200 mm spigots connect directly to circular duct sleeves without a separate plenum.

お客様の製品に関する懸念事項

A small air terminal must provide usable balancing adjustment without a bulky plenum or exposed damper handle.

A fixed circular outlet cannot be balanced after the branch duct is installed.Rotating the center disc changes the annular airway until the measured volume reaches the intended value.

Cleaning staff accidentally change the final air-valve setting.The selected disc position is secured with a hidden spindle lock nut behind the face.

A large grille looks disproportionate in a narrow support-room ceiling.Compact 100–200 mm nominal sizes provide a restrained circular room-side appearance.

The duct sleeve becomes inaccessible behind a fixed valve.Spring or bayonet mounting allows the complete valve body to withdraw for inspection and cleaning.

典型的な用途

Cleanroom support-room extractGowning-room ceiling exhaustJanitor and clean utility roomsSmall laboratory support branchesControlled corridor supply or relief air

技術的なパラメータ

Typical dimensions and materials for an adjustable supply or extract disc valve are listed below.

コア材料	Formed sheet-steel valve casing and disc with galvanized threaded spindle, crossbar and lock nut
パネルの厚さ	0.8–1.2 mm formed steel valve casing and disc
有効幅	132–245 mm overall visible face diameter
最大長さ	Up to 245 mm overall face diameter for nominal size 200
鋼鉄の厚さを直面する	0.8–1.2 mm powder-coated steel face
コア密度	Approximately 7850 kg/m³ for the steel valve casing and disc
熱伝導率	Approximately 45–60 W/(m·K) for the steel valve casing and disc
表面仕上げ	Smooth white powder coating similar to RAL 9010 with galvanized concealed hardware
ジョイントタイプ	Spring or bayonet fit to a Ø100–200 mm duct sleeve with threaded adjustable disc
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Supply-air radial discharge profileExtract-air valve profileNominal sizes 100, 125, 160 and 200 mmWhite powder coat or stainless-steel finish

Planning a Adjustable Disc Air Valve specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する