Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Unidad de manejo de aire vertical
A stacked upflow or downflow air handler that reduces plant-room footprint while retaining full filter, coil and fan functionality.
- Small Floor Footprint
- Upflow or Downflow Layout
- Stacked Service Sections
- Rigid Vertical Frame
Introducción del producto
The vertical air handling unit stacks treatment components to use room height instead of long floor area. Air may enter low and discharge upward, or follow a downflow path to a raised floor or low duct. Filters, coils and fan sections are separated by accessible service zones, and the frame is reinforced for the vertical component load. Drain and trap geometry are arranged for the selected casing pressure, while lifting points and removable panels support installation in compact plant rooms.
Características clave
Upflow and downflow discharge options align with high-level or underfloor duct systems.
Reinforced base and frame transfer fan, coil and filter loads through the vertical casing.
Dedicated access doors keep filter and wet-section service points reachable from one side.
Preocupaciones del producto del cliente
Stacking components saves floor space only if service access, drainage and structural loads are addressed in the vertical arrangement.
A horizontal unit blocks the only service aisle in a small plant room.Vertical stacking shortens the footprint while preserving treatment functions.
The discharge duct must turn sharply and adds unnecessary pressure loss.Upflow or downflow discharge connects directly to the building riser or floor plenum.
Upper filters are difficult to lift and remove safely.Filter stages are positioned at practical service height with slide-out tracks.
Condensate trap height is insufficient under negative casing pressure.The base frame provides clearance for a trap sized to the actual section pressure.
Aplicaciones típicas
Compact cleanroom plant roomsHospital mechanical closetsLaboratory retrofit shaftsVertical supply risersUnderfloor clean-air systems
Parámetros técnicos
Typical casing values for an insulated vertical air handling unit are listed below.
| Materiales Core | Polyurethane or mineral-wool insulation in reinforced double-skin panels |
|---|---|
| Panel de espesor | 40–60 mm insulated panel |
| Ancho efectivo | 800–2400 mm nominal casing width |
| Longitud máxima | Up to 3500 mm horizontal base length for stacked configuration |
| Acero frente a espesor | 0.6–1.0 mm casing skins with reinforced base members |
| Densidad Core | 41–45 kg/m³ polyurethane or 84–100 kg/m³ mineral wool |
| Conductividad térmica | 0.022–0.040 W/(m·K) according to panel core |
| Superficie acabada | Powder-coated galvanized exterior with galvanized or stainless inner lining |
| Tipo conjunto | Compression-gasketed stacked panels on bolted structural base and vertical frame |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Upflow, downflow or side dischargeChilled-water, hot-water or DX coilsEC plug fan or fan arrayBottom or side return-air connection
Planning a Vertical Air Handling Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
