Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Control de salas limpias y sistemas de monitoreo ambiental
Transmisor de temperatura y humedad
A combined wall or duct transmitter that delivers matched temperature and relative-humidity signals from one serviceable sensing assembly.
- Combined T and RH Measurement
- Matched Dual Outputs
- Replaceable Probe Filter
- Local Display Option
Introducción del producto
The temperature and humidity transmitter places a stable temperature element and capacitive humidity sensor in the same aspirated probe so both variables represent the same air sample. Internal electronics compensate and linearize the measurements, then provide separate analog signals or a digital network value set. A replaceable filter protects the probe, while an optional display shows temperature, relative humidity and derived dew point locally. Wall, duct and remote-probe configurations address different cleanroom and AHU measurement locations.
Características clave
Separate calibrated outputs simplify connection to environmental monitoring and HVAC controls.
Replaceable probe filters protect the sensing assembly without replacing the transmitter body.
Optional display presents temperature, RH and derived dew point at the installation location.
Preocupaciones del producto del cliente
Temperature and humidity values become difficult to interpret when they come from different locations, response times or sensor housings.
Separate sensors report conditions from slightly different air zones.A combined probe measures both variables from one shared air sample.
Humidity drift cannot be distinguished from temperature-driven RH change.Synchronized temperature and RH trends reveal whether moisture content or temperature caused the shift.
Probe contamination requires replacement of the entire transmitter.A serviceable filter and replaceable probe option reduce maintenance scope.
Commissioning staff cannot verify the local reading without a laptop.An optional display provides immediate temperature, humidity and dew-point values.
Aplicaciones típicas
Cleanroom environmental monitoringAHU supply and return ductsHumidity-controlled storage suitesLaboratory HVAC control
Parámetros técnicos
Typical construction for a combined cleanroom temperature and humidity transmitter is shown below.
| Materiales Core | Platinum temperature element and capacitive polymer RH sensor in polycarbonate housing with optional stainless probe |
|---|---|
| Panel de espesor | 35-60 mm transmitter depth |
| Ancho efectivo | 100-150 mm wall housing width |
| Longitud máxima | Remote or duct probes up to 400 mm |
| Acero frente a espesor | 0-0.8 mm; optional 304 stainless probe tube |
| Densidad Core | 1180-1220 kg/m³ for polycarbonate housing components |
| Conductividad térmica | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| Superficie acabada | Smooth white housing with black display window and satin stainless probe option |
| Tipo conjunto | Wall base or duct flange with removable filtered probe and pluggable output terminals |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Wall, duct or remote probeDual analog outputsModbus or BACnet communicationLocal dew-point display
Planning a Temperature and Humidity Transmitter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
