Complete white temperature and humidity transmitter with black display and filtered probe

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

온도 및 습도 전송기

A combined wall or duct transmitter that delivers matched temperature and relative-humidity signals from one serviceable sensing assembly.

Combined T and RH Measurement
Matched Dual Outputs
Replaceable Probe Filter
Local Display Option

견적 요청 제품 찾아보기

상품 소개

The temperature and humidity transmitter places a stable temperature element and capacitive humidity sensor in the same aspirated probe so both variables represent the same air sample. Internal electronics compensate and linearize the measurements, then provide separate analog signals or a digital network value set. A replaceable filter protects the probe, while an optional display shows temperature, relative humidity and derived dew point locally. Wall, duct and remote-probe configurations address different cleanroom and AHU measurement locations.

주요 기능

Co-located temperature and humidity elements measure the same local air sample.

Separate calibrated outputs simplify connection to environmental monitoring and HVAC controls.

Replaceable probe filters protect the sensing assembly without replacing the transmitter body.

Optional display presents temperature, RH and derived dew point at the installation location.

고객 제품 관심사

Temperature and humidity values become difficult to interpret when they come from different locations, response times or sensor housings.

Separate sensors report conditions from slightly different air zones.A combined probe measures both variables from one shared air sample.

Humidity drift cannot be distinguished from temperature-driven RH change.Synchronized temperature and RH trends reveal whether moisture content or temperature caused the shift.

Probe contamination requires replacement of the entire transmitter.A serviceable filter and replaceable probe option reduce maintenance scope.

Commissioning staff cannot verify the local reading without a laptop.An optional display provides immediate temperature, humidity and dew-point values.

일반적인 응용 프로그램

Cleanroom environmental monitoringAHU supply and return ductsHumidity-controlled storage suitesLaboratory HVAC control

기술 매개변수

Typical construction for a combined cleanroom temperature and humidity transmitter is shown below.

핵심 재료	Platinum temperature element and capacitive polymer RH sensor in polycarbonate housing with optional stainless probe
패널 두께	35-60 mm transmitter depth
유효 폭	100-150 mm wall housing width
최대 길이	Remote or duct probes up to 400 mm
강철 면면 두께	0-0.8 mm; optional 304 stainless probe tube
코어 밀도	1180-1220 kg/m³ for polycarbonate housing components
열전도도 (Thermal Conductivity)	0.19-0.22 W/(m·K) for polycarbonate enclosure material
표면 마무리	Smooth white housing with black display window and satin stainless probe option
접합 유형	Wall base or duct flange with removable filtered probe and pluggable output terminals
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Wall, duct or remote probeDual analog outputsModbus or BACnet communicationLocal dew-point display

Planning a Temperature and Humidity Transmitter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.