Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraumsteuerung und Umweltüberwachungssysteme
Temperatur - und Feuchtigkeitstransmitter
A combined wall or duct transmitter that delivers matched temperature and relative-humidity signals from one serviceable sensing assembly.
- Combined T and RH Measurement
- Matched Dual Outputs
- Replaceable Probe Filter
- Local Display Option
Produkteinführung
The temperature and humidity transmitter places a stable temperature element and capacitive humidity sensor in the same aspirated probe so both variables represent the same air sample. Internal electronics compensate and linearize the measurements, then provide separate analog signals or a digital network value set. A replaceable filter protects the probe, while an optional display shows temperature, relative humidity and derived dew point locally. Wall, duct and remote-probe configurations address different cleanroom and AHU measurement locations.
Key Features
Separate calibrated outputs simplify connection to environmental monitoring and HVAC controls.
Replaceable probe filters protect the sensing assembly without replacing the transmitter body.
Optional display presents temperature, RH and derived dew point at the installation location.
Kunden Produktbedenken
Temperature and humidity values become difficult to interpret when they come from different locations, response times or sensor housings.
Separate sensors report conditions from slightly different air zones.A combined probe measures both variables from one shared air sample.
Humidity drift cannot be distinguished from temperature-driven RH change.Synchronized temperature and RH trends reveal whether moisture content or temperature caused the shift.
Probe contamination requires replacement of the entire transmitter.A serviceable filter and replaceable probe option reduce maintenance scope.
Commissioning staff cannot verify the local reading without a laptop.An optional display provides immediate temperature, humidity and dew-point values.
Typische Anwendungen
Cleanroom environmental monitoringAHU supply and return ductsHumidity-controlled storage suitesLaboratory HVAC control
Technische Parameter
Typical construction for a combined cleanroom temperature and humidity transmitter is shown below.
| Core Material | Platinum temperature element and capacitive polymer RH sensor in polycarbonate housing with optional stainless probe |
|---|---|
| Panel Dicke | 35-60 mm transmitter depth |
| Effektive Breite | 100-150 mm wall housing width |
| Maximale Länge | Remote or duct probes up to 400 mm |
| Stahl facing Dicke | 0-0.8 mm; optional 304 stainless probe tube |
| Kerndichte | 1180-1220 kg/m³ for polycarbonate housing components |
| Thermische Leitfähigkeit | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| Oberfläche Finish | Smooth white housing with black display window and satin stainless probe option |
| Gemeinsamer Typ | Wall base or duct flange with removable filtered probe and pluggable output terminals |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Wall, duct or remote probeDual analog outputsModbus or BACnet communicationLocal dew-point display
Planning a Temperature and Humidity Transmitter specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
