Complete white temperature and humidity transmitter with black display and filtered probe

クリーンルーム管理 · 環境モニタリングシステム

温度および湿度トランスミッタ

A combined wall or duct transmitter that delivers matched temperature and relative-humidity signals from one serviceable sensing assembly.

Combined T and RH Measurement
Matched Dual Outputs
Replaceable Probe Filter
Local Display Option

見積もりリクエスト製品案内

商品紹介

The temperature and humidity transmitter places a stable temperature element and capacitive humidity sensor in the same aspirated probe so both variables represent the same air sample. Internal electronics compensate and linearize the measurements, then provide separate analog signals or a digital network value set. A replaceable filter protects the probe, while an optional display shows temperature, relative humidity and derived dew point locally. Wall, duct and remote-probe configurations address different cleanroom and AHU measurement locations.

主要な特徴

Co-located temperature and humidity elements measure the same local air sample.

Separate calibrated outputs simplify connection to environmental monitoring and HVAC controls.

Replaceable probe filters protect the sensing assembly without replacing the transmitter body.

Optional display presents temperature, RH and derived dew point at the installation location.

お客様の製品に関する懸念事項

Temperature and humidity values become difficult to interpret when they come from different locations, response times or sensor housings.

Separate sensors report conditions from slightly different air zones.A combined probe measures both variables from one shared air sample.

Humidity drift cannot be distinguished from temperature-driven RH change.Synchronized temperature and RH trends reveal whether moisture content or temperature caused the shift.

Probe contamination requires replacement of the entire transmitter.A serviceable filter and replaceable probe option reduce maintenance scope.

Commissioning staff cannot verify the local reading without a laptop.An optional display provides immediate temperature, humidity and dew-point values.

典型的な用途

Cleanroom environmental monitoringAHU supply and return ductsHumidity-controlled storage suitesLaboratory HVAC control

技術的なパラメータ

Typical construction for a combined cleanroom temperature and humidity transmitter is shown below.

コア材料	Platinum temperature element and capacitive polymer RH sensor in polycarbonate housing with optional stainless probe
パネルの厚さ	35-60 mm transmitter depth
有効幅	100-150 mm wall housing width
最大長さ	Remote or duct probes up to 400 mm
鋼鉄の厚さを直面する	0-0.8 mm; optional 304 stainless probe tube
コア密度	1180-1220 kg/m³ for polycarbonate housing components
熱伝導率	0.19-0.22 W/(m·K) for polycarbonate enclosure material
表面仕上げ	Smooth white housing with black display window and satin stainless probe option
ジョイントタイプ	Wall base or duct flange with removable filtered probe and pluggable output terminals
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Wall, duct or remote probeDual analog outputsModbus or BACnet communicationLocal dew-point display

Planning a Temperature and Humidity Transmitter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する