Complete white temperature and humidity transmitter with black display and filtered probe

Sistem Kawalan Bilik Bersih dan Pemantauan Alam Sekitar

Pemancar suhu dan kelembapan

A combined wall or duct transmitter that delivers matched temperature and relative-humidity signals from one serviceable sensing assembly.

Combined T and RH Measurement
Matched Dual Outputs
Replaceable Probe Filter
Local Display Option

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The temperature and humidity transmitter places a stable temperature element and capacitive humidity sensor in the same aspirated probe so both variables represent the same air sample. Internal electronics compensate and linearize the measurements, then provide separate analog signals or a digital network value set. A replaceable filter protects the probe, while an optional display shows temperature, relative humidity and derived dew point locally. Wall, duct and remote-probe configurations address different cleanroom and AHU measurement locations.

Ciri-ciri Utama

Co-located temperature and humidity elements measure the same local air sample.

Separate calibrated outputs simplify connection to environmental monitoring and HVAC controls.

Replaceable probe filters protect the sensing assembly without replacing the transmitter body.

Optional display presents temperature, RH and derived dew point at the installation location.

Kebimbangan Produk Pelanggan

Temperature and humidity values become difficult to interpret when they come from different locations, response times or sensor housings.

Separate sensors report conditions from slightly different air zones.A combined probe measures both variables from one shared air sample.

Humidity drift cannot be distinguished from temperature-driven RH change.Synchronized temperature and RH trends reveal whether moisture content or temperature caused the shift.

Probe contamination requires replacement of the entire transmitter.A serviceable filter and replaceable probe option reduce maintenance scope.

Commissioning staff cannot verify the local reading without a laptop.An optional display provides immediate temperature, humidity and dew-point values.

Permohonan yang biasa

Cleanroom environmental monitoringAHU supply and return ductsHumidity-controlled storage suitesLaboratory HVAC control

Parameter teknikal

Typical construction for a combined cleanroom temperature and humidity transmitter is shown below.

Bahan Teras	Platinum temperature element and capacitive polymer RH sensor in polycarbonate housing with optional stainless probe
Ketebalan Panel	35-60 mm transmitter depth
Lebar berkesan	100-150 mm wall housing width
Panjang maksimum	Remote or duct probes up to 400 mm
Keluli Menghadapi Ketebalan	0-0.8 mm; optional 304 stainless probe tube
Ketumpatan teras	1180-1220 kg/m³ for polycarbonate housing components
Kekonduksian Terma	0.19-0.22 W/(m·K) for polycarbonate enclosure material
Kemasan permukaan	Smooth white housing with black display window and satin stainless probe option
Jenis Bersatu	Wall base or duct flange with removable filtered probe and pluggable output terminals
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Wall, duct or remote probeDual analog outputsModbus or BACnet communicationLocal dew-point display

Planning a Temperature and Humidity Transmitter specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami