Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Banco limpio de flujo laminar de operador único
A compact one-person clean bench sized around a centered working position for routine non-hazardous preparation, inspection and assembly.
- Centered One-Person Zone
- Compact Laboratory Footprint
- Low-Glare Task Lighting
- Acceso al servicio frontal
Introducción del producto
This model narrows the filtered work zone to the natural reach envelope of one seated or standing operator. The centered sash opening, lighting and control panel reduce unnecessary cabinet width while retaining a full stainless work surface. The fan-filter section is accessible from the front or top so the unit can be installed against a wall. Its clean-air zone is intended for non-hazardous product protection in laboratories and small production rooms.
Características clave
A compact base fits between standard laboratory casework modules.
The controller and pressure display remain within easy reach without entering the clean zone.
A one-piece stainless work tray reduces seams beneath small components.
Front-access service panels permit filter and electrical checks where rear clearance is limited.
Preocupaciones del producto del cliente
Small laboratories need a protected work zone without paying for unused width or losing access to routine service points.
A wide two-person bench wastes valuable laboratory wall space.The cabinet width is matched to a single centered operator position.
Controls mounted inside the work zone interrupt clean handling.External front controls keep operating adjustments outside the protected surface.
Small parts disappear into segmented worktop joints.A one-piece lift-out tray provides a continuous handling surface.
Rear service access is impossible against fixed casework.The fan, filter gauge and electrical components can be reached from the front or top.
Aplicaciones típicas
Small-batch device assemblyMicroscope sample setupNon-hazardous media preparationClean component inspection
Parámetros técnicos
Typical configurable construction ranges for a one-person laminar flow clean bench are listed below.
| Materiales Core | SUS304 one-piece work tray with powder-coated steel cabinet and acoustic mineral-fibre lining |
|---|---|
| Panel de espesor | 25-40 mm double-wall cabinet sections |
| Ancho efectivo | 700-1000 mm clear working width |
| Longitud máxima | Up to 2100 mm overall freestanding height |
| Acero frente a espesor | 0.8-1.0 mm outer steel; 1.0-1.2 mm SUS304 inner liner |
| Densidad Core | 60-100 kg/m³ acoustic mineral-fibre lining |
| Conductividad térmica | 0.036-0.046 W/(m·K) for the acoustic lining |
| Superficie acabada | White epoxy-polyester cabinet finish with brushed stainless work tray |
| Tipo conjunto | Sealed folded cabinet joints with a lift-out work tray and clamped filter gasket |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Sitting or standing base heightManual front sashIntegrated power socketsLeft or right service utility panel
Planning a Single-Operator Laminar Flow Clean Bench specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
