Complete single-operator laminar flow clean bench in three-quarter view

層流 · 封じ込め装置

シングルオペレータラミナールフロークリーンベンチ

A compact one-person clean bench sized around a centered working position for routine non-hazardous preparation, inspection and assembly.

Centered One-Person Zone
Compact Laboratory Footprint
Low-Glare Task Lighting
フロントサービスアクセス

見積もりリクエスト製品案内

商品紹介

This model narrows the filtered work zone to the natural reach envelope of one seated or standing operator. The centered sash opening, lighting and control panel reduce unnecessary cabinet width while retaining a full stainless work surface. The fan-filter section is accessible from the front or top so the unit can be installed against a wall. Its clean-air zone is intended for non-hazardous product protection in laboratories and small production rooms.

主要な特徴

The work opening and light are centered on one operator rather than divided across unused bench width.

A compact base fits between standard laboratory casework modules.

The controller and pressure display remain within easy reach without entering the clean zone.

A one-piece stainless work tray reduces seams beneath small components.

Front-access service panels permit filter and electrical checks where rear clearance is limited.

お客様の製品に関する懸念事項

Small laboratories need a protected work zone without paying for unused width or losing access to routine service points.

A wide two-person bench wastes valuable laboratory wall space.The cabinet width is matched to a single centered operator position.

Controls mounted inside the work zone interrupt clean handling.External front controls keep operating adjustments outside the protected surface.

Small parts disappear into segmented worktop joints.A one-piece lift-out tray provides a continuous handling surface.

Rear service access is impossible against fixed casework.The fan, filter gauge and electrical components can be reached from the front or top.

典型的な用途

Small-batch device assemblyMicroscope sample setupNon-hazardous media preparationClean component inspection

技術的なパラメータ

Typical configurable construction ranges for a one-person laminar flow clean bench are listed below.

コア材料	SUS304 one-piece work tray with powder-coated steel cabinet and acoustic mineral-fibre lining
パネルの厚さ	25-40 mm double-wall cabinet sections
有効幅	700-1000 mm clear working width
最大長さ	Up to 2100 mm overall freestanding height
鋼鉄の厚さを直面する	0.8-1.0 mm outer steel; 1.0-1.2 mm SUS304 inner liner
コア密度	60-100 kg/m³ acoustic mineral-fibre lining
熱伝導率	0.036-0.046 W/(m·K) for the acoustic lining
表面仕上げ	White epoxy-polyester cabinet finish with brushed stainless work tray
ジョイントタイプ	Sealed folded cabinet joints with a lift-out work tray and clamped filter gasket
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Sitting or standing base heightManual front sashIntegrated power socketsLeft or right service utility panel

Planning a Single-Operator Laminar Flow Clean Bench specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する