Complete single-operator laminar flow clean bench in three-quarter view

Équipement d'écoulement et de confinement laminaires

Banque de nettoyage à flux laminaire Single-Operator par

A compact one-person clean bench sized around a centered working position for routine non-hazardous preparation, inspection and assembly.

Centered One-Person Zone
Compact Laboratory Footprint
Low-Glare Task Lighting
Service Front Access

Demander un devis. Browse les produits

Introduction de produit

This model narrows the filtered work zone to the natural reach envelope of one seated or standing operator. The centered sash opening, lighting and control panel reduce unnecessary cabinet width while retaining a full stainless work surface. The fan-filter section is accessible from the front or top so the unit can be installed against a wall. Its clean-air zone is intended for non-hazardous product protection in laboratories and small production rooms.

Key Features

The work opening and light are centered on one operator rather than divided across unused bench width.

A compact base fits between standard laboratory casework modules.

The controller and pressure display remain within easy reach without entering the clean zone.

A one-piece stainless work tray reduces seams beneath small components.

Front-access service panels permit filter and electrical checks where rear clearance is limited.

Préoccupations du client produit

Small laboratories need a protected work zone without paying for unused width or losing access to routine service points.

A wide two-person bench wastes valuable laboratory wall space.The cabinet width is matched to a single centered operator position.

Controls mounted inside the work zone interrupt clean handling.External front controls keep operating adjustments outside the protected surface.

Small parts disappear into segmented worktop joints.A one-piece lift-out tray provides a continuous handling surface.

Rear service access is impossible against fixed casework.The fan, filter gauge and electrical components can be reached from the front or top.

Les applications typiques

Small-batch device assemblyMicroscope sample setupNon-hazardous media preparationClean component inspection

Paramètres techniques

Typical configurable construction ranges for a one-person laminar flow clean bench are listed below.

Matériaux de base	SUS304 one-piece work tray with powder-coated steel cabinet and acoustic mineral-fibre lining
Panneau épaisseur	25-40 mm double-wall cabinet sections
Largeur effective	700-1000 mm clear working width
Longueur maximale	Up to 2100 mm overall freestanding height
Acier face épaisseur	0.8-1.0 mm outer steel; 1.0-1.2 mm SUS304 inner liner
Densité Core	60-100 kg/m³ acoustic mineral-fibre lining
Conductivité thermique	0.036-0.046 W/(m·K) for the acoustic lining
surface finie	White epoxy-polyester cabinet finish with brushed stainless work tray
Type joint	Sealed folded cabinet joints with a lift-out work tray and clamped filter gasket
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Sitting or standing base heightManual front sashIntegrated power socketsLeft or right service utility panel

Planning a Single-Operator Laminar Flow Clean Bench specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe