Complete single-operator laminar flow clean bench in three-quarter view

Aliran Laminar dan Peralatan Pengekangan

Aliran Laminar Pengendali Tunggal Bersih Bench

A compact one-person clean bench sized around a centered working position for routine non-hazardous preparation, inspection and assembly.

Centered One-Person Zone
Compact Laboratory Footprint
Low-Glare Task Lighting
Front Service Access

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This model narrows the filtered work zone to the natural reach envelope of one seated or standing operator. The centered sash opening, lighting and control panel reduce unnecessary cabinet width while retaining a full stainless work surface. The fan-filter section is accessible from the front or top so the unit can be installed against a wall. Its clean-air zone is intended for non-hazardous product protection in laboratories and small production rooms.

Ciri-ciri Utama

The work opening and light are centered on one operator rather than divided across unused bench width.

A compact base fits between standard laboratory casework modules.

The controller and pressure display remain within easy reach without entering the clean zone.

A one-piece stainless work tray reduces seams beneath small components.

Front-access service panels permit filter and electrical checks where rear clearance is limited.

Kebimbangan Produk Pelanggan

Small laboratories need a protected work zone without paying for unused width or losing access to routine service points.

A wide two-person bench wastes valuable laboratory wall space.The cabinet width is matched to a single centered operator position.

Controls mounted inside the work zone interrupt clean handling.External front controls keep operating adjustments outside the protected surface.

Small parts disappear into segmented worktop joints.A one-piece lift-out tray provides a continuous handling surface.

Rear service access is impossible against fixed casework.The fan, filter gauge and electrical components can be reached from the front or top.

Permohonan yang biasa

Small-batch device assemblyMicroscope sample setupNon-hazardous media preparationClean component inspection

Parameter teknikal

Typical configurable construction ranges for a one-person laminar flow clean bench are listed below.

Bahan Teras	SUS304 one-piece work tray with powder-coated steel cabinet and acoustic mineral-fibre lining
Ketebalan Panel	25-40 mm double-wall cabinet sections
Lebar berkesan	700-1000 mm clear working width
Panjang maksimum	Up to 2100 mm overall freestanding height
Keluli Menghadapi Ketebalan	0.8-1.0 mm outer steel; 1.0-1.2 mm SUS304 inner liner
Ketumpatan teras	60-100 kg/m³ acoustic mineral-fibre lining
Kekonduksian Terma	0.036-0.046 W/(m·K) for the acoustic lining
Kemasan permukaan	White epoxy-polyester cabinet finish with brushed stainless work tray
Jenis Bersatu	Sealed folded cabinet joints with a lift-out work tray and clamped filter gasket
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Sitting or standing base heightManual front sashIntegrated power socketsLeft or right service utility panel

Planning a Single-Operator Laminar Flow Clean Bench specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami