Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Single MgO Rock Wool Panel de sala limpia
An asymmetric cleanroom wall panel with one MgO reinforcement board positioned beneath the designated steel face, giving targeted substrate strength while using less material and weight than a double-sided MgO construction.
- One-Sided MgO Reinforcement
- Lower Composite Weight
- Defined Reinforced Face
- Rock Wool Insulation
Introducción del producto
This panel combines a rock wool core, one magnesium oxide reinforcement board and two cleanable steel facings. The MgO layer is deliberately placed on the side that needs a firmer substrate, while the opposite side retains a simpler build-up. Clear orientation marking ensures that the reinforced face is installed toward equipment, utility or impact exposure. The panel is useful where wall functions differ from one side to the other and a full double-MgO construction would add unnecessary weight.
Características clave
Reduced inorganic-board content lowers handling weight compared with double-sided reinforcement.
Orientation marks make the reinforced surface easy to identify during installation.
The rock wool core provides mineral insulation while remaining closed behind metal facings.
Dedicated inserts can be added behind known accessory positions without reinforcing the whole panel.
Preocupaciones del producto del cliente
This panel addresses installations where only one wall face needs a rigid substrate or added impact support.
Using two MgO boards adds weight where only one face needs reinforcement.The asymmetric build-up places a single board behind the functional side of the wall.
Installers can accidentally reverse a one-sided reinforced panel.Permanent face identification and directional packaging keep the MgO side correctly oriented.
Light fittings may crush an unsupported mineral-core surface.The MgO layer spreads low to moderate fastening loads over a wider area.
Different activities on opposite sides of a wall require different surface behavior.The panel construction assigns the reinforced face to the more demanding side while preserving a clean finish on both sides.
Aplicaciones típicas
Cleanroom walls with a utility-side faceLaboratory partitions supporting light fittingsRetrofit enclosures with handling limitsEquipment perimeter wallsMedical-device production partitions
Parámetros técnicos
Standard construction ranges for the one-sided MgO reinforced rock wool panel are listed below.
| Materiales Core | Rock wool core with one 5 mm MgO reinforcement board |
|---|---|
| Panel de espesor | 50, 75, 100 or 150 mm |
| Ancho efectivo | 980 o 1180 mm |
| Longitud máxima | 6000 mm |
| Acero frente a espesor | 0,40 - 0,60 mm |
| Densidad Core | 100–140 kg/m³ rock wool |
| Conductividad térmica | 0.040–0.045 W/(m·K) |
| Superficie acabada | Pre-painted galvanized steel; stainless steel on the exposed side available |
| Tipo conjunto | Framed tongue-and-groove joint with marked panel orientation |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Left- or right-side reinforcementAccessory backing insertsDifferent finishes on opposite facesFactory-cut service openings
Planning a Single MgO Rock Wool Cleanroom Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
