Complete single MgO rock wool cleanroom panel showing its asymmetric construction

클린룸 벽 및 천장 시스템

단일 MgO Rock Wool 클린룸 패널

An asymmetric cleanroom wall panel with one MgO reinforcement board positioned beneath the designated steel face, giving targeted substrate strength while using less material and weight than a double-sided MgO construction.

One-Sided MgO Reinforcement
Lower Composite Weight
Defined Reinforced Face
Rock Wool Insulation

견적 요청 제품 찾아보기

상품 소개

This panel combines a rock wool core, one magnesium oxide reinforcement board and two cleanable steel facings. The MgO layer is deliberately placed on the side that needs a firmer substrate, while the opposite side retains a simpler build-up. Clear orientation marking ensures that the reinforced face is installed toward equipment, utility or impact exposure. The panel is useful where wall functions differ from one side to the other and a full double-MgO construction would add unnecessary weight.

주요 기능

A single MgO board concentrates extra stiffness on the face that actually needs it.

Reduced inorganic-board content lowers handling weight compared with double-sided reinforcement.

Orientation marks make the reinforced surface easy to identify during installation.

The rock wool core provides mineral insulation while remaining closed behind metal facings.

Dedicated inserts can be added behind known accessory positions without reinforcing the whole panel.

고객 제품 관심사

This panel addresses installations where only one wall face needs a rigid substrate or added impact support.

Using two MgO boards adds weight where only one face needs reinforcement.The asymmetric build-up places a single board behind the functional side of the wall.

Installers can accidentally reverse a one-sided reinforced panel.Permanent face identification and directional packaging keep the MgO side correctly oriented.

Light fittings may crush an unsupported mineral-core surface.The MgO layer spreads low to moderate fastening loads over a wider area.

Different activities on opposite sides of a wall require different surface behavior.The panel construction assigns the reinforced face to the more demanding side while preserving a clean finish on both sides.

일반적인 응용 프로그램

Cleanroom walls with a utility-side faceLaboratory partitions supporting light fittingsRetrofit enclosures with handling limitsEquipment perimeter wallsMedical-device production partitions

기술 매개변수

Standard construction ranges for the one-sided MgO reinforced rock wool panel are listed below.

핵심 재료	Rock wool core with one 5 mm MgO reinforcement board
패널 두께	50, 75, 100 또는 150 mm
유효 폭	980 또는 1180 mm
최대 길이	6000 mm
강철 면면 두께	0. 40 - 0. 60 mm
코어 밀도	100–140 kg/m³ rock wool
열전도도 (Thermal Conductivity)	0.040–0.045 W/(m·K)
표면 마무리	Pre-painted galvanized steel; stainless steel on the exposed side available
접합 유형	Framed tongue-and-groove joint with marked panel orientation
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Left- or right-side reinforcementAccessory backing insertsDifferent finishes on opposite facesFactory-cut service openings

Planning a Single MgO Rock Wool Cleanroom Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.