Complete single MgO rock wool cleanroom panel showing its asymmetric construction

クリーンルームの壁と天井システム

単一の MgO ロックウールクリーンルームパネル

An asymmetric cleanroom wall panel with one MgO reinforcement board positioned beneath the designated steel face, giving targeted substrate strength while using less material and weight than a double-sided MgO construction.

One-Sided MgO Reinforcement
Lower Composite Weight
Defined Reinforced Face
Rock Wool Insulation

見積もりリクエスト製品案内

商品紹介

This panel combines a rock wool core, one magnesium oxide reinforcement board and two cleanable steel facings. The MgO layer is deliberately placed on the side that needs a firmer substrate, while the opposite side retains a simpler build-up. Clear orientation marking ensures that the reinforced face is installed toward equipment, utility or impact exposure. The panel is useful where wall functions differ from one side to the other and a full double-MgO construction would add unnecessary weight.

主要な特徴

A single MgO board concentrates extra stiffness on the face that actually needs it.

Reduced inorganic-board content lowers handling weight compared with double-sided reinforcement.

Orientation marks make the reinforced surface easy to identify during installation.

The rock wool core provides mineral insulation while remaining closed behind metal facings.

Dedicated inserts can be added behind known accessory positions without reinforcing the whole panel.

お客様の製品に関する懸念事項

This panel addresses installations where only one wall face needs a rigid substrate or added impact support.

Using two MgO boards adds weight where only one face needs reinforcement.The asymmetric build-up places a single board behind the functional side of the wall.

Installers can accidentally reverse a one-sided reinforced panel.Permanent face identification and directional packaging keep the MgO side correctly oriented.

Light fittings may crush an unsupported mineral-core surface.The MgO layer spreads low to moderate fastening loads over a wider area.

Different activities on opposite sides of a wall require different surface behavior.The panel construction assigns the reinforced face to the more demanding side while preserving a clean finish on both sides.

典型的な用途

Cleanroom walls with a utility-side faceLaboratory partitions supporting light fittingsRetrofit enclosures with handling limitsEquipment perimeter wallsMedical-device production partitions

技術的なパラメータ

Standard construction ranges for the one-sided MgO reinforced rock wool panel are listed below.

コア材料	Rock wool core with one 5 mm MgO reinforcement board
パネルの厚さ	50, 75, 100 or 150 mm
有効幅	980 または 1180 の mm
最大長さ	6000 mm
鋼鉄の厚さを直面する	0.40 — 0.60 mm
コア密度	100–140 kg/m³ rock wool
熱伝導率	0.040–0.045 W/(m·K)
表面仕上げ	Pre-painted galvanized steel; stainless steel on the exposed side available
ジョイントタイプ	Framed tongue-and-groove joint with marked panel orientation
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Left- or right-side reinforcementAccessory backing insertsDifferent finishes on opposite facesFactory-cut service openings

Planning a Single MgO Rock Wool Cleanroom Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する