Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Wand - und Deckensysteme
Single MgO Rock Wool Reinraum Panel
An asymmetric cleanroom wall panel with one MgO reinforcement board positioned beneath the designated steel face, giving targeted substrate strength while using less material and weight than a double-sided MgO construction.
- One-Sided MgO Reinforcement
- Lower Composite Weight
- Defined Reinforced Face
- Rock Wool Insulation
Produkteinführung
This panel combines a rock wool core, one magnesium oxide reinforcement board and two cleanable steel facings. The MgO layer is deliberately placed on the side that needs a firmer substrate, while the opposite side retains a simpler build-up. Clear orientation marking ensures that the reinforced face is installed toward equipment, utility or impact exposure. The panel is useful where wall functions differ from one side to the other and a full double-MgO construction would add unnecessary weight.
Key Features
Reduced inorganic-board content lowers handling weight compared with double-sided reinforcement.
Orientation marks make the reinforced surface easy to identify during installation.
The rock wool core provides mineral insulation while remaining closed behind metal facings.
Dedicated inserts can be added behind known accessory positions without reinforcing the whole panel.
Kunden Produktbedenken
This panel addresses installations where only one wall face needs a rigid substrate or added impact support.
Using two MgO boards adds weight where only one face needs reinforcement.The asymmetric build-up places a single board behind the functional side of the wall.
Installers can accidentally reverse a one-sided reinforced panel.Permanent face identification and directional packaging keep the MgO side correctly oriented.
Light fittings may crush an unsupported mineral-core surface.The MgO layer spreads low to moderate fastening loads over a wider area.
Different activities on opposite sides of a wall require different surface behavior.The panel construction assigns the reinforced face to the more demanding side while preserving a clean finish on both sides.
Typische Anwendungen
Cleanroom walls with a utility-side faceLaboratory partitions supporting light fittingsRetrofit enclosures with handling limitsEquipment perimeter wallsMedical-device production partitions
Technische Parameter
Standard construction ranges for the one-sided MgO reinforced rock wool panel are listed below.
| Core Material | Rock wool core with one 5 mm MgO reinforcement board |
|---|---|
| Panel Dicke | 50, 75, 100 oder 150 mm |
| Effektive Breite | 980 or 1180 mm |
| Maximale Länge | 6000 mm |
| Stahl facing Dicke | 0,40 bis 0,60 mm |
| Kerndichte | 100–140 kg/m³ rock wool |
| Thermische Leitfähigkeit | 0.040–0.045 W/(m·K) |
| Oberfläche Finish | Pre-painted galvanized steel; stainless steel on the exposed side available |
| Gemeinsamer Typ | Framed tongue-and-groove joint with marked panel orientation |
| Customisierung | Verfügbar basierend auf der beabsichtigten Anwendung und Betriebsumgebung |
Verfügbare Optionen
Left- or right-side reinforcementAccessory backing insertsDifferent finishes on opposite facesFactory-cut service openings
Planning a Single MgO Rock Wool Cleanroom Panel specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
