Sistem Dinding dan Langit-langit Cleanroom

Single MgO Rock Wool Cleanroom Panel

An asymmetric cleanroom wall panel with one MgO reinforcement board positioned beneath the designated steel face, giving targeted substrate strength while using less material and weight than a double-sided MgO construction.

One-Sided MgO Reinforcement
Lower Composite Weight
Defined Reinforced Face
Rock Wool Insulation

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This panel combines a rock wool core, one magnesium oxide reinforcement board and two cleanable steel facings. The MgO layer is deliberately placed on the side that needs a firmer substrate, while the opposite side retains a simpler build-up. Clear orientation marking ensures that the reinforced face is installed toward equipment, utility or impact exposure. The panel is useful where wall functions differ from one side to the other and a full double-MgO construction would add unnecessary weight.

Fitur utama:

A single MgO board concentrates extra stiffness on the face that actually needs it.

Reduced inorganic-board content lowers handling weight compared with double-sided reinforcement.

Orientation marks make the reinforced surface easy to identify during installation.

The rock wool core provides mineral insulation while remaining closed behind metal facings.

Dedicated inserts can be added behind known accessory positions without reinforcing the whole panel.

Kekhawatiran produk pelanggan

This panel addresses installations where only one wall face needs a rigid substrate or added impact support.

Using two MgO boards adds weight where only one face needs reinforcement.The asymmetric build-up places a single board behind the functional side of the wall.

Installers can accidentally reverse a one-sided reinforced panel.Permanent face identification and directional packaging keep the MgO side correctly oriented.

Light fittings may crush an unsupported mineral-core surface.The MgO layer spreads low to moderate fastening loads over a wider area.

Different activities on opposite sides of a wall require different surface behavior.The panel construction assigns the reinforced face to the more demanding side while preserving a clean finish on both sides.

Aplikasi yang Tipis

Cleanroom walls with a utility-side faceLaboratory partitions supporting light fittingsRetrofit enclosures with handling limitsEquipment perimeter wallsMedical-device production partitions

Parameter teknis

Standard construction ranges for the one-sided MgO reinforced rock wool panel are listed below.

Bahan inti	Rock wool core with one 5 mm MgO reinforcement board
Ketebalan Panel (Panel Thickness)	50, 75, 100 or 150 mm
Efektif lebar	980 atau 1180 mm
Panjang maksimum	6000 mm ZXQ000003
Baja menghadap ketebalan	0,40 - 0,60 mm
Kepadatan inti (core density)	100–140 kg/m³ rock wool
Konduktivitas Termal (Thermal Conductivity)	0.040–0.045 W/(m·K)
Permukaan selesai	Pre-painted galvanized steel; stainless steel on the exposed side available
Jenis Bersama	Framed tongue-and-groove joint with marked panel orientation
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

Left- or right-side reinforcementAccessory backing insertsDifferent finishes on opposite facesFactory-cut service openings

Planning a Single MgO Rock Wool Cleanroom Panel specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami