Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de utilidad de Cleanroom
Sanitario acero inoxidable tubería
Polished 316L hygienic tube runs and fabricated spools engineered for drainable clean-utility distribution with controlled welds and low-hold-up connections.
- Hygienic 316L flow path
- Orbital-weld-ready tube ends
- Drainable low-hold-up routing
Introducción del producto
Sanitary Stainless Steel Piping forms the product-contact backbone of purified-water, WFI, clean-steam and hygienic process systems. Straight tubes and prefabricated spools use controlled dimensions, smooth internal surfaces and repeatable weld preparation so field joints can be aligned, purged and inspected without creating avoidable crevices or pockets.
Características clave
Controlled tube outside diameter and wall
Mechanical-polish or electropolish options
Square-cut orbital-weld preparation
Prefabricated branch and return spools
Drain-slope and support coordination
Hygienic clamp termination options
Heat and surface traceability options
Preocupaciones del producto del cliente
Reliable sanitary piping requires more than smooth tube: slope, weld penetration, support spacing, internal finish and branch geometry all influence drainage and cleanability.
Field joints become misaligned or internally steppedUse matched tube tolerances, square-cut ends and controlled orbital-weld fit-up.
Low points retain water after shutdownCoordinate spool geometry, supports and installed slope around defined drains.
Rough surfaces trap residues and accelerate rouge buildupSelect and verify an internal finish appropriate to the utility and cleaning regime.
Excess field welding extends shutdown workPrefabricate surveyed spool sections with planned weld and clamp breakpoints.
Aplicaciones típicas
Purified Water distributionWater for Injection loopsClean-steam headersCIP and SIP circuitsHygienic product transfer
Parámetros técnicos
Tube standard, diameter, wall, surface grade, spool geometry and support arrangement are selected for pressure, temperature, drainage and installation constraints.
| Materiales Core | 316L stainless steel hygienic tube and fabricated spool components |
|---|---|
| Panel de espesor | Tube wall typically 0.89–2.77 mm |
| Ancho efectivo | Tube outside diameter typically 6.35–152.4 mm |
| Longitud máxima | Straight tube length typically up to 6000 mm |
| Acero frente a espesor | Fabricated support plate typically 1.5–3.0 mm |
| Densidad Core | 316L stainless steel density approximately 8000 kg/m³ |
| Conductividad térmica | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Superficie acabada | Mechanically polished or electropolished internal surface with clean satin exterior |
| Tipo conjunto | Orbital butt welds with hygienic clamp unions at planned service breakpoints |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
ASME BPE, ISO or EN tube dimensionsMechanical-polish or electropolish gradePrefabricated branch spoolsHygienic clamp breakpointsSlope-matched supportsHeat tracing and insulation interfaceMaterial and weld documentation package
Planning a Sanitary Stainless Steel Piping specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
