Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Sistem Utilitas Cleanroom
Pipa Stainless Steel Sanitary Pipa Stainless Steel
Polished 316L hygienic tube runs and fabricated spools engineered for drainable clean-utility distribution with controlled welds and low-hold-up connections.
- Hygienic 316L flow path
- Orbital-weld-ready tube ends
- Drainable low-hold-up routing
Perkenalan produk
Sanitary Stainless Steel Piping forms the product-contact backbone of purified-water, WFI, clean-steam and hygienic process systems. Straight tubes and prefabricated spools use controlled dimensions, smooth internal surfaces and repeatable weld preparation so field joints can be aligned, purged and inspected without creating avoidable crevices or pockets.
Fitur utama:
Controlled tube outside diameter and wall
Mechanical-polish or electropolish options
Square-cut orbital-weld preparation
Prefabricated branch and return spools
Drain-slope and support coordination
Hygienic clamp termination options
Heat and surface traceability options
Kekhawatiran produk pelanggan
Reliable sanitary piping requires more than smooth tube: slope, weld penetration, support spacing, internal finish and branch geometry all influence drainage and cleanability.
Field joints become misaligned or internally steppedUse matched tube tolerances, square-cut ends and controlled orbital-weld fit-up.
Low points retain water after shutdownCoordinate spool geometry, supports and installed slope around defined drains.
Rough surfaces trap residues and accelerate rouge buildupSelect and verify an internal finish appropriate to the utility and cleaning regime.
Excess field welding extends shutdown workPrefabricate surveyed spool sections with planned weld and clamp breakpoints.
Aplikasi yang Tipis
Purified Water distributionWater for Injection loopsClean-steam headersCIP and SIP circuitsHygienic product transfer
Parameter teknis
Tube standard, diameter, wall, surface grade, spool geometry and support arrangement are selected for pressure, temperature, drainage and installation constraints.
| Bahan inti | 316L stainless steel hygienic tube and fabricated spool components |
|---|---|
| Ketebalan Panel (Panel Thickness) | Tube wall typically 0.89–2.77 mm |
| Efektif lebar | Tube outside diameter typically 6.35–152.4 mm |
| Panjang maksimum | Straight tube length typically up to 6000 mm |
| Baja menghadap ketebalan | Fabricated support plate typically 1.5–3.0 mm |
| Kepadatan inti (core density) | 316L stainless steel kepadatan sekitar 8000 kg / m3 |
| Konduktivitas Termal (Thermal Conductivity) | 316L stainless steel sekitar 15 W / (m · K) pada suhu ambien |
| Permukaan selesai | Mechanically polished or electropolished internal surface with clean satin exterior |
| Jenis Bersama | Orbital butt welds with hygienic clamp unions at planned service breakpoints |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
ASME BPE, ISO or EN tube dimensionsMechanical-polish or electropolish gradePrefabricated branch spoolsHygienic clamp breakpointsSlope-matched supportsHeat tracing and insulation interfaceMaterial and weld documentation package
Planning a Sanitary Stainless Steel Piping specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
