Sanitary stainless steel piping spool three-quarter view with twin parallel tube runs

클린룸 유틸리티 시스템

위생 스테인레스 스틸 파이프

Polished 316L hygienic tube runs and fabricated spools engineered for drainable clean-utility distribution with controlled welds and low-hold-up connections.

Hygienic 316L flow path
Orbital-weld-ready tube ends
Drainable low-hold-up routing

견적 요청 제품 찾아보기

상품 소개

Sanitary Stainless Steel Piping forms the product-contact backbone of purified-water, WFI, clean-steam and hygienic process systems. Straight tubes and prefabricated spools use controlled dimensions, smooth internal surfaces and repeatable weld preparation so field joints can be aligned, purged and inspected without creating avoidable crevices or pockets.

주요 기능

316L stainless product-contact construction

Controlled tube outside diameter and wall

Mechanical-polish or electropolish options

Square-cut orbital-weld preparation

Prefabricated branch and return spools

Drain-slope and support coordination

Hygienic clamp termination options

Heat and surface traceability options

고객 제품 관심사

Reliable sanitary piping requires more than smooth tube: slope, weld penetration, support spacing, internal finish and branch geometry all influence drainage and cleanability.

Field joints become misaligned or internally steppedUse matched tube tolerances, square-cut ends and controlled orbital-weld fit-up.

Low points retain water after shutdownCoordinate spool geometry, supports and installed slope around defined drains.

Rough surfaces trap residues and accelerate rouge buildupSelect and verify an internal finish appropriate to the utility and cleaning regime.

Excess field welding extends shutdown workPrefabricate surveyed spool sections with planned weld and clamp breakpoints.

일반적인 응용 프로그램

Purified Water distributionWater for Injection loopsClean-steam headersCIP and SIP circuitsHygienic product transfer

기술 매개변수

Tube standard, diameter, wall, surface grade, spool geometry and support arrangement are selected for pressure, temperature, drainage and installation constraints.

핵심 재료	316L stainless steel hygienic tube and fabricated spool components
패널 두께	Tube wall typically 0.89–2.77 mm
유효 폭	Tube outside diameter typically 6.35–152.4 mm
최대 길이	Straight tube length typically up to 6000 mm
강철 면면 두께	Fabricated support plate typically 1.5–3.0 mm
코어 밀도	316L stainless steel density approximately 8000 kg/m³
열전도도 (Thermal Conductivity)	316L stainless steel approximately 15 W/(m·K) at ambient temperature
표면 마무리	Mechanically polished or electropolished internal surface with clean satin exterior
접합 유형	Orbital butt welds with hygienic clamp unions at planned service breakpoints
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

ASME BPE, ISO or EN tube dimensionsMechanical-polish or electropolish gradePrefabricated branch spoolsHygienic clamp breakpointsSlope-matched supportsHeat tracing and insulation interfaceMaterial and weld documentation package

Planning a Sanitary Stainless Steel Piping specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.