Sanitary stainless steel piping spool three-quarter view with twin parallel tube runs

クリーンルームユーティリティシステム

衛生的なステンレス鋼の配管

Polished 316L hygienic tube runs and fabricated spools engineered for drainable clean-utility distribution with controlled welds and low-hold-up connections.

Hygienic 316L flow path
Orbital-weld-ready tube ends
Drainable low-hold-up routing

見積もりリクエスト製品案内

商品紹介

Sanitary Stainless Steel Piping forms the product-contact backbone of purified-water, WFI, clean-steam and hygienic process systems. Straight tubes and prefabricated spools use controlled dimensions, smooth internal surfaces and repeatable weld preparation so field joints can be aligned, purged and inspected without creating avoidable crevices or pockets.

主要な特徴

316L stainless product-contact construction

Controlled tube outside diameter and wall

Mechanical-polish or electropolish options

Square-cut orbital-weld preparation

Prefabricated branch and return spools

Drain-slope and support coordination

Hygienic clamp termination options

Heat and surface traceability options

お客様の製品に関する懸念事項

Reliable sanitary piping requires more than smooth tube: slope, weld penetration, support spacing, internal finish and branch geometry all influence drainage and cleanability.

Field joints become misaligned or internally steppedUse matched tube tolerances, square-cut ends and controlled orbital-weld fit-up.

Low points retain water after shutdownCoordinate spool geometry, supports and installed slope around defined drains.

Rough surfaces trap residues and accelerate rouge buildupSelect and verify an internal finish appropriate to the utility and cleaning regime.

Excess field welding extends shutdown workPrefabricate surveyed spool sections with planned weld and clamp breakpoints.

典型的な用途

Purified Water distributionWater for Injection loopsClean-steam headersCIP and SIP circuitsHygienic product transfer

技術的なパラメータ

Tube standard, diameter, wall, surface grade, spool geometry and support arrangement are selected for pressure, temperature, drainage and installation constraints.

コア材料	316L stainless steel hygienic tube and fabricated spool components
パネルの厚さ	Tube wall typically 0.89–2.77 mm
有効幅	Tube outside diameter typically 6.35–152.4 mm
最大長さ	Straight tube length typically up to 6000 mm
鋼鉄の厚さを直面する	Fabricated support plate typically 1.5–3.0 mm
コア密度	316L stainless steel density approximately 8000 kg/m³
熱伝導率	316L stainless steel approximately 15 W/(m·K) at ambient temperature
表面仕上げ	Mechanically polished or electropolished internal surface with clean satin exterior
ジョイントタイプ	Orbital butt welds with hygienic clamp unions at planned service breakpoints
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

ASME BPE, ISO or EN tube dimensionsMechanical-polish or electropolish gradePrefabricated branch spoolsHygienic clamp breakpointsSlope-matched supportsHeat tracing and insulation interfaceMaterial and weld documentation package

Planning a Sanitary Stainless Steel Piping specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する