Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia específicos de la industria
Sistema de barras ionizantes
A compact cleanroom ionizing bar that delivers balanced positive and negative ions across work surfaces, wafer handling zones and enclosed mini-environments.
- Balanced Ion Output
- Low-Particle Construction
- Remote Status Monitoring
- Flexible Bar Lengths
Introducción del producto
The ionizing bar system places protected emitter points along a slim, low-outgassing housing to neutralize electrostatic charge over a controlled working distance. A dedicated controller maintains stable output and provides operating indication, while stainless mounting clips permit accurate alignment above conveyors, benches or process openings. Configurable lengths and clean-air assistance allow the system to match both localized and wider treatment zones.
Características clave
Smooth polymer housing and protected silicon emitters reduce particle traps in clean production areas.
Visible status indicators and controller connections simplify routine operating checks.
Adjustable stainless mounting clips support accurate working-distance and angle setup.
Preocupaciones del producto del cliente
Static charge can attract particles, disturb lightweight materials and expose sensitive devices to electrostatic discharge during controlled manufacturing.
Charge accumulates unevenly across long work surfaces.Evenly spaced emitter modules distribute balanced ions along the full active bar length.
Exposed ionizer hardware can become a contamination source.A smooth low-outgassing enclosure and protected emitter geometry support cleanroom use and maintenance.
Ionization performance changes when installation distance or angle is inconsistent.Adjustable stainless clips allow repeatable positioning for the required coverage zone.
Operators may not notice a disabled or disconnected ionizer.Local status lights and an optional remote monitor provide clear operating indication.
Aplicaciones típicas
Semiconductor mini-environmentsWafer and substrate handling stationsCleanroom assembly benchesPrecision film and electronics processing
Parámetros técnicos
Typical configuration values for a cleanroom ionizing bar system are listed below.
| Materiales Core | Low-outgassing engineering polymer housing with silicon emitter points and stainless steel mounting hardware |
|---|---|
| Panel de espesor | 2-4 mm housing wall thickness |
| Ancho efectivo | 300-2400 mm active ionizing length |
| Longitud máxima | Up to 2500 mm overall bar length |
| Acero frente a espesor | 1.0-1.5 mm stainless steel mounting clips |
| Densidad Core | 1150-1450 kg/m³ for engineering polymer housing material |
| Conductividad térmica | 0.20-0.35 W/(m·K) for polymer housing material |
| Superficie acabada | Smooth white low-outgassing housing with passivated stainless hardware |
| Tipo conjunto | Modular emitter bar with sealed end connections, adjustable clips and plug-in controller interface |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Multiple active bar lengthsClean dry air-assisted configurationRemote alarm and monitoring outputTitanium or silicon emitter points
Planning a Ionizing Bar System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
