Cleanroom ionizing bar system in three-quarter view with controller and mounting clips

Peralatan Cleanroom Spesifik Industri

Sistem Ionizing Bar

A compact cleanroom ionizing bar that delivers balanced positive and negative ions across work surfaces, wafer handling zones and enclosed mini-environments.

Balanced Ion Output
Low-Particle Construction
Remote Status Monitoring
Flexible Bar Lengths

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The ionizing bar system places protected emitter points along a slim, low-outgassing housing to neutralize electrostatic charge over a controlled working distance. A dedicated controller maintains stable output and provides operating indication, while stainless mounting clips permit accurate alignment above conveyors, benches or process openings. Configurable lengths and clean-air assistance allow the system to match both localized and wider treatment zones.

Fitur utama:

Distributed emitter points provide uniform ion coverage along the active length of the bar.

Smooth polymer housing and protected silicon emitters reduce particle traps in clean production areas.

Visible status indicators and controller connections simplify routine operating checks.

Adjustable stainless mounting clips support accurate working-distance and angle setup.

Kekhawatiran produk pelanggan

Static charge can attract particles, disturb lightweight materials and expose sensitive devices to electrostatic discharge during controlled manufacturing.

Charge accumulates unevenly across long work surfaces.Evenly spaced emitter modules distribute balanced ions along the full active bar length.

Exposed ionizer hardware can become a contamination source.A smooth low-outgassing enclosure and protected emitter geometry support cleanroom use and maintenance.

Ionization performance changes when installation distance or angle is inconsistent.Adjustable stainless clips allow repeatable positioning for the required coverage zone.

Operators may not notice a disabled or disconnected ionizer.Local status lights and an optional remote monitor provide clear operating indication.

Aplikasi yang Tipis

Semiconductor mini-environmentsWafer and substrate handling stationsCleanroom assembly benchesPrecision film and electronics processing

Parameter teknis

Typical configuration values for a cleanroom ionizing bar system are listed below.

Bahan inti	Low-outgassing engineering polymer housing with silicon emitter points and stainless steel mounting hardware
Ketebalan Panel (Panel Thickness)	2-4 mm housing wall thickness
Efektif lebar	300-2400 mm active ionizing length
Panjang maksimum	Up to 2500 mm overall bar length
Baja menghadap ketebalan	1.0-1.5 mm stainless steel mounting clips
Kepadatan inti (core density)	1150-1450 kg/m³ for engineering polymer housing material
Konduktivitas Termal (Thermal Conductivity)	0.20-0.35 W/(m·K) for polymer housing material
Permukaan selesai	Smooth white low-outgassing housing with passivated stainless hardware
Jenis Bersama	Modular emitter bar with sealed end connections, adjustable clips and plug-in controller interface
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Multiple active bar lengthsClean dry air-assisted configurationRemote alarm and monitoring outputTitanium or silicon emitter points

Planning a Ionizing Bar System specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami