Cleanroom ionizing bar system in three-quarter view with controller and mounting clips

業界特有のクリーンルーム機器

I のイオン化バーシステム

A compact cleanroom ionizing bar that delivers balanced positive and negative ions across work surfaces, wafer handling zones and enclosed mini-environments.

Balanced Ion Output
Low-Particle Construction
Remote Status Monitoring
Flexible Bar Lengths

見積もりリクエスト製品案内

商品紹介

The ionizing bar system places protected emitter points along a slim, low-outgassing housing to neutralize electrostatic charge over a controlled working distance. A dedicated controller maintains stable output and provides operating indication, while stainless mounting clips permit accurate alignment above conveyors, benches or process openings. Configurable lengths and clean-air assistance allow the system to match both localized and wider treatment zones.

主要な特徴

Distributed emitter points provide uniform ion coverage along the active length of the bar.

Smooth polymer housing and protected silicon emitters reduce particle traps in clean production areas.

Visible status indicators and controller connections simplify routine operating checks.

Adjustable stainless mounting clips support accurate working-distance and angle setup.

お客様の製品に関する懸念事項

Static charge can attract particles, disturb lightweight materials and expose sensitive devices to electrostatic discharge during controlled manufacturing.

Charge accumulates unevenly across long work surfaces.Evenly spaced emitter modules distribute balanced ions along the full active bar length.

Exposed ionizer hardware can become a contamination source.A smooth low-outgassing enclosure and protected emitter geometry support cleanroom use and maintenance.

Ionization performance changes when installation distance or angle is inconsistent.Adjustable stainless clips allow repeatable positioning for the required coverage zone.

Operators may not notice a disabled or disconnected ionizer.Local status lights and an optional remote monitor provide clear operating indication.

典型的な用途

Semiconductor mini-environmentsWafer and substrate handling stationsCleanroom assembly benchesPrecision film and electronics processing

技術的なパラメータ

Typical configuration values for a cleanroom ionizing bar system are listed below.

コア材料	Low-outgassing engineering polymer housing with silicon emitter points and stainless steel mounting hardware
パネルの厚さ	2-4 mm housing wall thickness
有効幅	300-2400 mm active ionizing length
最大長さ	Up to 2500 mm overall bar length
鋼鉄の厚さを直面する	1.0-1.5 mm stainless steel mounting clips
コア密度	1150-1450 kg/m³ for engineering polymer housing material
熱伝導率	0.20-0.35 W/(m·K) for polymer housing material
表面仕上げ	Smooth white low-outgassing housing with passivated stainless hardware
ジョイントタイプ	Modular emitter bar with sealed end connections, adjustable clips and plug-in controller interface
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Multiple active bar lengthsClean dry air-assisted configurationRemote alarm and monitoring outputTitanium or silicon emitter points

Planning a Ionizing Bar System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する