Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Branchenspezifische Reinraumausrüstung
Ionisation Bar System
A compact cleanroom ionizing bar that delivers balanced positive and negative ions across work surfaces, wafer handling zones and enclosed mini-environments.
- Balanced Ion Output
- Low-Particle Construction
- Remote Status Monitoring
- Flexible Bar Lengths
Produkteinführung
The ionizing bar system places protected emitter points along a slim, low-outgassing housing to neutralize electrostatic charge over a controlled working distance. A dedicated controller maintains stable output and provides operating indication, while stainless mounting clips permit accurate alignment above conveyors, benches or process openings. Configurable lengths and clean-air assistance allow the system to match both localized and wider treatment zones.
Key Features
Smooth polymer housing and protected silicon emitters reduce particle traps in clean production areas.
Visible status indicators and controller connections simplify routine operating checks.
Adjustable stainless mounting clips support accurate working-distance and angle setup.
Kunden Produktbedenken
Static charge can attract particles, disturb lightweight materials and expose sensitive devices to electrostatic discharge during controlled manufacturing.
Charge accumulates unevenly across long work surfaces.Evenly spaced emitter modules distribute balanced ions along the full active bar length.
Exposed ionizer hardware can become a contamination source.A smooth low-outgassing enclosure and protected emitter geometry support cleanroom use and maintenance.
Ionization performance changes when installation distance or angle is inconsistent.Adjustable stainless clips allow repeatable positioning for the required coverage zone.
Operators may not notice a disabled or disconnected ionizer.Local status lights and an optional remote monitor provide clear operating indication.
Typische Anwendungen
Semiconductor mini-environmentsWafer and substrate handling stationsCleanroom assembly benchesPrecision film and electronics processing
Technische Parameter
Typical configuration values for a cleanroom ionizing bar system are listed below.
| Core Material | Low-outgassing engineering polymer housing with silicon emitter points and stainless steel mounting hardware |
|---|---|
| Panel Dicke | 2-4 mm housing wall thickness |
| Effektive Breite | 300-2400 mm active ionizing length |
| Maximale Länge | Up to 2500 mm overall bar length |
| Stahl facing Dicke | 1.0-1.5 mm stainless steel mounting clips |
| Kerndichte | 1150-1450 kg/m³ for engineering polymer housing material |
| Thermische Leitfähigkeit | 0.20-0.35 W/(m·K) for polymer housing material |
| Oberfläche Finish | Smooth white low-outgassing housing with passivated stainless hardware |
| Gemeinsamer Typ | Modular emitter bar with sealed end connections, adjustable clips and plug-in controller interface |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Multiple active bar lengthsClean dry air-assisted configurationRemote alarm and monitoring outputTitanium or silicon emitter points
Planning a Ionizing Bar System specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
