Cleanroom ionizing bar system in three-quarter view with controller and mounting clips

Peralatan Bilik Bersih Spesifik Industri

Sistem Bar Pengion

A compact cleanroom ionizing bar that delivers balanced positive and negative ions across work surfaces, wafer handling zones and enclosed mini-environments.

Balanced Ion Output
Low-Particle Construction
Remote Status Monitoring
Flexible Bar Lengths

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The ionizing bar system places protected emitter points along a slim, low-outgassing housing to neutralize electrostatic charge over a controlled working distance. A dedicated controller maintains stable output and provides operating indication, while stainless mounting clips permit accurate alignment above conveyors, benches or process openings. Configurable lengths and clean-air assistance allow the system to match both localized and wider treatment zones.

Ciri-ciri Utama

Distributed emitter points provide uniform ion coverage along the active length of the bar.

Smooth polymer housing and protected silicon emitters reduce particle traps in clean production areas.

Visible status indicators and controller connections simplify routine operating checks.

Adjustable stainless mounting clips support accurate working-distance and angle setup.

Kebimbangan Produk Pelanggan

Static charge can attract particles, disturb lightweight materials and expose sensitive devices to electrostatic discharge during controlled manufacturing.

Charge accumulates unevenly across long work surfaces.Evenly spaced emitter modules distribute balanced ions along the full active bar length.

Exposed ionizer hardware can become a contamination source.A smooth low-outgassing enclosure and protected emitter geometry support cleanroom use and maintenance.

Ionization performance changes when installation distance or angle is inconsistent.Adjustable stainless clips allow repeatable positioning for the required coverage zone.

Operators may not notice a disabled or disconnected ionizer.Local status lights and an optional remote monitor provide clear operating indication.

Permohonan yang biasa

Semiconductor mini-environmentsWafer and substrate handling stationsCleanroom assembly benchesPrecision film and electronics processing

Parameter teknikal

Typical configuration values for a cleanroom ionizing bar system are listed below.

Bahan Teras	Low-outgassing engineering polymer housing with silicon emitter points and stainless steel mounting hardware
Ketebalan Panel	2-4 mm housing wall thickness
Lebar berkesan	300-2400 mm active ionizing length
Panjang maksimum	Up to 2500 mm overall bar length
Keluli Menghadapi Ketebalan	1.0-1.5 mm stainless steel mounting clips
Ketumpatan teras	1150-1450 kg/m³ for engineering polymer housing material
Kekonduksian Terma	0.20-0.35 W/(m·K) for polymer housing material
Kemasan permukaan	Smooth white low-outgassing housing with passivated stainless hardware
Jenis Bersatu	Modular emitter bar with sealed end connections, adjustable clips and plug-in controller interface
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Multiple active bar lengthsClean dry air-assisted configurationRemote alarm and monitoring outputTitanium or silicon emitter points

Planning a Ionizing Bar System specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami