Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Sala limpia Ventana Gasket
A gray silicone glazing wedge that cushions and seals cleanroom observation glass within an aluminum retaining frame.
- Continuous Glass-Edge Seal
- Non-Marking Silicone
- Controlled Glazing Compression
- Flush Frame Integration
Introducción del producto
The cleanroom window gasket is an extruded silicone glazing profile installed between the glass edge and the aluminum retaining channel. Its wedge or keyed section applies continuous pressure without allowing hard metal contact with the pane. In double-glazed observation windows, the gasket works with the spacer and frame system to position both panes, accommodate small dimensional variation and present a smooth perimeter suitable for controlled interiors.
Características clave
Resilient silicone cushions the pane and accommodates small frame and glass tolerances.
The continuous profile closes the visible perimeter without exposed mechanical fasteners.
Custom corner joining supports rectangular windows with consistent compression on every side.
Preocupaciones del producto del cliente
Cleanroom glazing needs continuous edge support without point loading the glass or leaving irregular recesses around the visible perimeter.
Direct metal contact creates concentrated stress at the glass edge.The resilient gasket separates the pane from the retaining channel and distributes compression.
Variable glass and frame tolerances create loose sections or excessive insertion force.The wedge geometry is matched to the actual channel and glazing thickness for controlled interference.
Open or uneven corners interrupt the cleanable perimeter seal.Cut and joined corner sections maintain a continuous visible gasket line around the window.
Migrating oils or dark marking can contaminate adjacent light-colored finishes.A suitable non-marking silicone compound is selected for contact with the specified glass and frame finish.
Aplicaciones típicas
Flush cleanroom observation windowsDouble-glazed cleanroom partitionsPass-through viewing panelsLaboratory wall windowsProcess enclosure glazing
Parámetros técnicos
Typical construction ranges for a silicone cleanroom glazing gasket and double-pane aluminum frame are listed below.
| Materiales Core | Gray non-marking silicone glazing wedge or keyed compression profile |
|---|---|
| Panel de espesor | 5-15 mm compatible individual glass pane thickness |
| Ancho efectivo | 8-30 mm gasket contact and retaining width |
| Longitud máxima | Up to 20000 mm continuous extrusion or custom joined window perimeter |
| Acero frente a espesor | 0.80-1.50 mm compatible stainless trim or retaining bead thickness |
| Densidad Core | Approximately 1100-1250 kg/m³ compact silicone profile density |
| Conductividad térmica | Approximately 0.20-0.30 W/(m·K) for compact silicone rubber |
| Superficie acabada | Smooth medium-gray silicone between clear glass and satin aluminum frame |
| Tipo conjunto | Continuous glazing wedge or keyed gasket with mitred, bonded or vulcanized corners |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Gray, translucent or black siliconeWedge or keyed profileSingle- or double-glazing geometryPre-cut joined window gasket set
Planning a Cleanroom Window Gasket specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
