Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Installation Zubehör
Reinraum Fensterdichtung
A gray silicone glazing wedge that cushions and seals cleanroom observation glass within an aluminum retaining frame.
- Continuous Glass-Edge Seal
- Non-Marking Silicone
- Controlled Glazing Compression
- Flush Frame Integration
Produkteinführung
The cleanroom window gasket is an extruded silicone glazing profile installed between the glass edge and the aluminum retaining channel. Its wedge or keyed section applies continuous pressure without allowing hard metal contact with the pane. In double-glazed observation windows, the gasket works with the spacer and frame system to position both panes, accommodate small dimensional variation and present a smooth perimeter suitable for controlled interiors.
Key Features
Resilient silicone cushions the pane and accommodates small frame and glass tolerances.
The continuous profile closes the visible perimeter without exposed mechanical fasteners.
Custom corner joining supports rectangular windows with consistent compression on every side.
Kunden Produktbedenken
Cleanroom glazing needs continuous edge support without point loading the glass or leaving irregular recesses around the visible perimeter.
Direct metal contact creates concentrated stress at the glass edge.The resilient gasket separates the pane from the retaining channel and distributes compression.
Variable glass and frame tolerances create loose sections or excessive insertion force.The wedge geometry is matched to the actual channel and glazing thickness for controlled interference.
Open or uneven corners interrupt the cleanable perimeter seal.Cut and joined corner sections maintain a continuous visible gasket line around the window.
Migrating oils or dark marking can contaminate adjacent light-colored finishes.A suitable non-marking silicone compound is selected for contact with the specified glass and frame finish.
Typische Anwendungen
Flush cleanroom observation windowsDouble-glazed cleanroom partitionsPass-through viewing panelsLaboratory wall windowsProcess enclosure glazing
Technische Parameter
Typical construction ranges for a silicone cleanroom glazing gasket and double-pane aluminum frame are listed below.
| Core Material | Gray non-marking silicone glazing wedge or keyed compression profile |
|---|---|
| Panel Dicke | 5-15 mm compatible individual glass pane thickness |
| Effektive Breite | 8-30 mm gasket contact and retaining width |
| Maximale Länge | Up to 20000 mm continuous extrusion or custom joined window perimeter |
| Stahl facing Dicke | 0.80-1.50 mm compatible stainless trim or retaining bead thickness |
| Kerndichte | Approximately 1100-1250 kg/m³ compact silicone profile density |
| Thermische Leitfähigkeit | Approximately 0.20-0.30 W/(m·K) for compact silicone rubber |
| Oberfläche Finish | Smooth medium-gray silicone between clear glass and satin aluminum frame |
| Gemeinsamer Typ | Continuous glazing wedge or keyed gasket with mitred, bonded or vulcanized corners |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Gray, translucent or black siliconeWedge or keyed profileSingle- or double-glazing geometryPre-cut joined window gasket set
Planning a Cleanroom Window Gasket specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
