Three-quarter view of a double-glazed cleanroom window with gray perimeter gasket

클린룸 설치 액세서리

클린룸 창 gasket

A gray silicone glazing wedge that cushions and seals cleanroom observation glass within an aluminum retaining frame.

Continuous Glass-Edge Seal
Non-Marking Silicone
Controlled Glazing Compression
Flush Frame Integration

견적 요청 제품 찾아보기

상품 소개

The cleanroom window gasket is an extruded silicone glazing profile installed between the glass edge and the aluminum retaining channel. Its wedge or keyed section applies continuous pressure without allowing hard metal contact with the pane. In double-glazed observation windows, the gasket works with the spacer and frame system to position both panes, accommodate small dimensional variation and present a smooth perimeter suitable for controlled interiors.

주요 기능

A shaped glazing wedge distributes retention pressure along the glass edge.

Resilient silicone cushions the pane and accommodates small frame and glass tolerances.

The continuous profile closes the visible perimeter without exposed mechanical fasteners.

Custom corner joining supports rectangular windows with consistent compression on every side.

고객 제품 관심사

Cleanroom glazing needs continuous edge support without point loading the glass or leaving irregular recesses around the visible perimeter.

Direct metal contact creates concentrated stress at the glass edge.The resilient gasket separates the pane from the retaining channel and distributes compression.

Variable glass and frame tolerances create loose sections or excessive insertion force.The wedge geometry is matched to the actual channel and glazing thickness for controlled interference.

Open or uneven corners interrupt the cleanable perimeter seal.Cut and joined corner sections maintain a continuous visible gasket line around the window.

Migrating oils or dark marking can contaminate adjacent light-colored finishes.A suitable non-marking silicone compound is selected for contact with the specified glass and frame finish.

일반적인 응용 프로그램

Flush cleanroom observation windowsDouble-glazed cleanroom partitionsPass-through viewing panelsLaboratory wall windowsProcess enclosure glazing

기술 매개변수

Typical construction ranges for a silicone cleanroom glazing gasket and double-pane aluminum frame are listed below.

핵심 재료	Gray non-marking silicone glazing wedge or keyed compression profile
패널 두께	5-15 mm compatible individual glass pane thickness
유효 폭	8-30 mm gasket contact and retaining width
최대 길이	Up to 20000 mm continuous extrusion or custom joined window perimeter
강철 면면 두께	0.80-1.50 mm compatible stainless trim or retaining bead thickness
코어 밀도	Approximately 1100-1250 kg/m³ compact silicone profile density
열전도도 (Thermal Conductivity)	Approximately 0.20-0.30 W/(m·K) for compact silicone rubber
표면 마무리	Smooth medium-gray silicone between clear glass and satin aluminum frame
접합 유형	Continuous glazing wedge or keyed gasket with mitred, bonded or vulcanized corners
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Gray, translucent or black siliconeWedge or keyed profileSingle- or double-glazing geometryPre-cut joined window gasket set

Planning a Cleanroom Window Gasket specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.