Three-quarter view of a double-glazed cleanroom window with gray perimeter gasket

Aksesoris Instalasi Cleanroom

Gasket Jendela Ruang Bersih

A gray silicone glazing wedge that cushions and seals cleanroom observation glass within an aluminum retaining frame.

Continuous Glass-Edge Seal
Non-Marking Silicone
Controlled Glazing Compression
Flush Frame Integration

Perkenalan produk

The cleanroom window gasket is an extruded silicone glazing profile installed between the glass edge and the aluminum retaining channel. Its wedge or keyed section applies continuous pressure without allowing hard metal contact with the pane. In double-glazed observation windows, the gasket works with the spacer and frame system to position both panes, accommodate small dimensional variation and present a smooth perimeter suitable for controlled interiors.

Fitur utama:

A shaped glazing wedge distributes retention pressure along the glass edge.

Resilient silicone cushions the pane and accommodates small frame and glass tolerances.

The continuous profile closes the visible perimeter without exposed mechanical fasteners.

Custom corner joining supports rectangular windows with consistent compression on every side.

Kekhawatiran produk pelanggan

Cleanroom glazing needs continuous edge support without point loading the glass or leaving irregular recesses around the visible perimeter.

Direct metal contact creates concentrated stress at the glass edge.The resilient gasket separates the pane from the retaining channel and distributes compression.

Variable glass and frame tolerances create loose sections or excessive insertion force.The wedge geometry is matched to the actual channel and glazing thickness for controlled interference.

Open or uneven corners interrupt the cleanable perimeter seal.Cut and joined corner sections maintain a continuous visible gasket line around the window.

Migrating oils or dark marking can contaminate adjacent light-colored finishes.A suitable non-marking silicone compound is selected for contact with the specified glass and frame finish.

Aplikasi yang Tipis

Flush cleanroom observation windowsDouble-glazed cleanroom partitionsPass-through viewing panelsLaboratory wall windowsProcess enclosure glazing

Parameter teknis

Typical construction ranges for a silicone cleanroom glazing gasket and double-pane aluminum frame are listed below.

Bahan inti	Gray non-marking silicone glazing wedge or keyed compression profile
Ketebalan Panel (Panel Thickness)	5-15 mm compatible individual glass pane thickness
Efektif lebar	8-30 mm gasket contact and retaining width
Panjang maksimum	Up to 20000 mm continuous extrusion or custom joined window perimeter
Baja menghadap ketebalan	0.80-1.50 mm compatible stainless trim or retaining bead thickness
Kepadatan inti (core density)	Approximately 1100-1250 kg/m³ compact silicone profile density
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.20-0.30 W/(m·K) for compact silicone rubber
Permukaan selesai	Smooth medium-gray silicone between clear glass and satin aluminum frame
Jenis Bersama	Continuous glazing wedge or keyed gasket with mitred, bonded or vulcanized corners
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Gray, translucent or black siliconeWedge or keyed profileSingle- or double-glazing geometryPre-cut joined window gasket set

Planning a Cleanroom Window Gasket specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami