Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Sala limpia Wall Sleeve
A double-flange stainless steel sleeve that forms a smooth, durable passage through cleanroom wall panels for pipes and services.
- Smooth Hollow Bore
- Double Hygienic Flange
- 304 Stainless Steel
- Panel-Edge Protection
Introducción del producto
The cleanroom wall sleeve is a rigid stainless tube with broad circular trim flanges at both ends. Installed through a prepared panel opening, it protects the exposed panel core and creates a smooth bore for routing a process pipe, conduit or service line. Continuous welded transitions and brushed surfaces simplify perimeter sealing and wipe-down on both room faces.
Características clave
Two broad flanges cover the cut edges on both sides of the partition.
Smooth welded tube-to-flange transitions reduce dirt-catching ledges.
Sleeve diameter and barrel length can be matched to the service and panel thickness.
Preocupaciones del producto del cliente
A raw hole through an insulated cleanroom panel exposes core material and leaves an irregular perimeter that is difficult to seal and clean.
Cut panel edges release debris or absorb moisture around the penetration.The continuous metal barrel isolates the panel core from the service passage.
Irregular openings leave visible gaps around the pipe route.Broad end flanges cover the cut perimeter and provide consistent sealing faces.
Sharp panel skins can damage cables or small tubing.The smooth finished bore removes exposed sheet-metal edges from the passage.
Fixed stock lengths do not match different wall build-ups.Sleeve length is produced to suit the panel thickness and finish allowance.
Aplicaciones típicas
Process-pipe wall passagesClean utility conduitsElectrical service penetrationsInstrument tubing routesHygienic panel openings
Parámetros técnicos
Typical construction ranges for a double-flange stainless cleanroom wall sleeve are listed below.
| Materiales Core | 304 or 316L stainless-steel tubular sleeve with welded circular flanges |
|---|---|
| Panel de espesor | 40-200 mm compatible partition thickness |
| Ancho efectivo | 25-300 mm clear internal bore diameter |
| Longitud máxima | Up to 1000 mm sleeve barrel length |
| Acero frente a espesor | 1.00-3.00 mm tube wall and flange fabrication thickness |
| Densidad Core | Approximately 7900-8000 kg/m³ for stainless steel |
| Conductividad térmica | Approximately 14-17 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Brushed, satin-polished or electropolished stainless-steel surfaces |
| Tipo conjunto | Through-panel sleeve with welded double trim flanges and sealed perimeter |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
304 or 316L stainless steelCustom bore diameterFixed or split trim flangeBrushed or electropolished finish
Planning a Cleanroom Wall Sleeve specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
