English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Вертикальная ламинарная стола для очистки
A top-filtered clean bench that directs uniform HEPA-filtered air downward across non-hazardous products and the stainless work surface.
- Top-Mounted HEPA Supply
- Uniform Vertical Downflow
- Stainless Work Surface
- Compact Bench Depth
Введение продукции
The vertical clean bench places its fan-filter section above the work zone so filtered air moves from the ceiling diffuser toward the perforated or open work area. This arrangement keeps the cabinet depth compact and allows larger instruments to sit near the rear wall without blocking a rear filter face. The inner liner and work tray are formed from cleanable stainless steel, while a clear front sash helps limit room-air disturbance. It is intended for non-hazardous assembly, preparation and inspection work that requires product protection rather than personnel containment.
Основные характеристики
The top-mounted fan-filter section preserves usable rear-wall space for instruments and fixtures.
A removable stainless work tray exposes the lower collection area for cleaning.
The adjustable front sash reduces cross-drafts while retaining comfortable hand access.
A differential-pressure indicator makes filter loading visible during routine operation.
Обеспокоенность клиентов продуктами
A vertical bench must maintain clean downward airflow without allowing tall equipment, room drafts or service work to compromise the protected zone.
Tall instruments create stagnant pockets beneath a small supply grille.A full-width ceiling diffuser distributes air around equipment footprints from above.
Room movement disturbs the open working face.The lowered clear sash and side panels shield the downflow while preserving access.
Spills collect beneath a fixed work surface.Lift-out stainless work sections provide direct cleaning access to the lower pan.
Operators cannot see gradual filter loading.A visible pressure gauge or electronic alarm indicates increasing resistance.
Типичные приложения
Medical-device assemblyOptical component inspectionCulture-media preparation with non-hazardous materialsPrecision electronics handling
Технические параметры
Typical configurable construction ranges for a vertical laminar flow clean bench are listed below.
| Основной материал | SUS304 work-zone liner with a powder-coated steel outer cabinet and mineral-wool acoustic infill |
|---|---|
| Толщина панели | 25-40 mm double-skin cabinet sections |
| эффективная ширина | 900-1800 mm clear working width |
| Максимальная длина | Up to 2200 mm overall cabinet height |
| Толщина линий стали | 0.8-1.2 mm powder-coated steel; 1.0-1.2 mm SUS304 work-zone liner |
| Плотность ядра | 80-120 kg/m³ mineral-wool acoustic infill |
| Теплопроводимость | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| Поверхностная отделка | Low-sheen white powder coating outside with brushed SUS304 work surfaces |
| Объединенный тип | Sealed double-skin cabinet seams with a removable work tray and gasketed HEPA filter frame |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
HEPA or ULPA final filterManual or motorized front sashUV-resistant clear side panelsElectrical outlets and service taps
Planning a Vertical Laminar Flow Clean Bench specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
