Three-quarter view of a complete vertical laminar flow clean bench

層流 · 封じ込め装置

垂直の層流のクリーンベンチ

A top-filtered clean bench that directs uniform HEPA-filtered air downward across non-hazardous products and the stainless work surface.

Top-Mounted HEPA Supply
Uniform Vertical Downflow
Stainless Work Surface
Compact Bench Depth

見積もりリクエスト製品案内

商品紹介

The vertical clean bench places its fan-filter section above the work zone so filtered air moves from the ceiling diffuser toward the perforated or open work area. This arrangement keeps the cabinet depth compact and allows larger instruments to sit near the rear wall without blocking a rear filter face. The inner liner and work tray are formed from cleanable stainless steel, while a clear front sash helps limit room-air disturbance. It is intended for non-hazardous assembly, preparation and inspection work that requires product protection rather than personnel containment.

主要な特徴

A full-width ceiling diffuser spreads filtered air over the complete work surface.

The top-mounted fan-filter section preserves usable rear-wall space for instruments and fixtures.

A removable stainless work tray exposes the lower collection area for cleaning.

The adjustable front sash reduces cross-drafts while retaining comfortable hand access.

A differential-pressure indicator makes filter loading visible during routine operation.

お客様の製品に関する懸念事項

A vertical bench must maintain clean downward airflow without allowing tall equipment, room drafts or service work to compromise the protected zone.

Tall instruments create stagnant pockets beneath a small supply grille.A full-width ceiling diffuser distributes air around equipment footprints from above.

Room movement disturbs the open working face.The lowered clear sash and side panels shield the downflow while preserving access.

Spills collect beneath a fixed work surface.Lift-out stainless work sections provide direct cleaning access to the lower pan.

Operators cannot see gradual filter loading.A visible pressure gauge or electronic alarm indicates increasing resistance.

典型的な用途

医療機器組立Optical component inspectionCulture-media preparation with non-hazardous materialsPrecision electronics handling

技術的なパラメータ

Typical configurable construction ranges for a vertical laminar flow clean bench are listed below.

コア材料	SUS304 work-zone liner with a powder-coated steel outer cabinet and mineral-wool acoustic infill
パネルの厚さ	25-40 mm double-skin cabinet sections
有効幅	900 — 1800 mm 明確な作業幅
最大長さ	最大 2200 mm 全体のキャビネット高さ
鋼鉄の厚さを直面する	0.8-1.2 mm powder-coated steel; 1.0-1.2 mm SUS304 work-zone liner
コア密度	80 — 120 kg / m3 ミネラルウール音響インフィル
熱伝導率	0.035-0.045 W/(m·K) for the mineral-wool infill
表面仕上げ	Low-sheen white powder coating outside with brushed SUS304 work surfaces
ジョイントタイプ	Sealed double-skin cabinet seams with a removable work tray and gasketed HEPA filter frame
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

HEPA or ULPA final filterManual or motorized front sashUV-resistant clear side panelsElectrical outlets and service taps

Planning a Vertical Laminar Flow Clean Bench specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する