Ultra-low dew point desiccant dehumidifier with multiple blue service sections

ОВК и оборудование для обработки воздуха в чистых помещениях

Ультра-низкая температура росы осушивающий деувлажнитель

A high-performance desiccant air-treatment unit engineered for dry rooms that require stable supply-air dew points below conventional comfort or process ranges.

Ultra-Low Supply Dew Point
Purge-Sector Heat Recovery
Multi-Stage Air Conditioning
Precision Dew-Point Feedback

Запрос котировки Просмотреть продукты

Введение продукции

The ultra-low dew point dehumidifier integrates deep precooling, a high-performance desiccant wheel, reactivation heating, purge heat recovery and aftercooling in one modular casing. The purge sector captures heat and moisture profiles that would otherwise limit the wheel at very low outlet humidity. A dedicated dew-point transmitter and modulating controls stabilize dry-air delivery for battery materials and other hygroscopic processes with large recirculation rates.

Основные характеристики

A high-capacity ceramic-composite rotor is selected for moisture pickup at extremely low vapor pressure.

A purge sector recovers useful heat within the wheel and reduces the reactivation energy required per kilogram of water removed.

Precooling lowers the incoming moisture load before the rotor, while aftercooling delivers air at the required room supply temperature.

PLC sequencing coordinates fans, chilled-water valves, reactivation output, rotor speed and dew-point alarms as one system.

Обеспокоенность клиентов продуктами

Ultra-dry manufacturing combines a very small moisture target with large personnel, infiltration and process loads that change throughout the shift.

A standard rotor stalls above the dew point required by moisture-reactive battery chemistry.The low-dew-point rotor, deep precooling and purge geometry preserve adsorption driving force at very low outlet humidity.

Reactivation heat becomes the dominant utility cost in a continuously occupied dry room.Purge heat recovery and modulating reactivation reduce heater demand during both design and part-load operation.

Door openings create sudden moisture spikes that threaten product exposure limits.Fast dew-point feedback increases dry-air capacity while the large recirculation flow restores the room moisture balance.

Uncoordinated cooling and drying controls cause unstable room temperature.One PLC stages precooling, adsorption and aftercooling to meet dew-point and dry-bulb targets independently.

Типичные приложения

Lithium-ion battery electrode dry roomsSolid-state battery research facilitiesMoisture-sensitive electrolyte filling areasPharmaceutical effervescent-product suitesSpecialty chemical powder handling rooms

Технические параметры

Representative construction ranges for a modular ultra-low-dew-point air-treatment package are listed below.

Основной материал	High-performance ceramic-composite desiccant rotor with mineral-wool-insulated double-skin casing
Толщина панели	50-75 mm thermally broken insulated casing panels
эффективная ширина	1600-3800 mm nominal modular unit width
Максимальная длина	Up to 8500 mm including precooling rotor reactivation and aftercooling sections
Толщина линий стали	0.8-1.2 mm pre-painted exterior sheet with galvanized interior liner
Плотность ядра	55-80 kg/m³ typical mineral-wool panel insulation density
Теплопроводимость	Approximately 0.035-0.045 W/(m·K) for mineral-wool panel insulation
Поверхностная отделка	Durable blue powder-coated exterior panels with galvanized or stainless internal air-path surfaces
Объединенный тип	Bolted structural modules with continuous gaskets, low-leakage dampers and sealed rotor-sector partitions
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Steam, gas or electric reactivation energyGreen-purge or power-purge heat-recovery sectionChilled-water or direct-expansion precooling and aftercoolingRedundant process fans and dual dew-point transmitters

Planning a Ultra-Low Dew Point Desiccant Dehumidifier specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой