Nhà cung cấp một cửa của bạn cho thiết bị phòng sạch và thiết bị vô trùng cơ sở thiết yếuHỗ trợ dự án quốc tế
Open mobile navigationClose mobile navigation
Thiết bị xử lý không khí và HVAC phòng sạch

Máy hút ẩm siêu thấp điểm sương

A high-performance desiccant air-treatment unit engineered for dry rooms that require stable supply-air dew points below conventional comfort or process ranges.
  • Ultra-Low Supply Dew Point
  • Purge-Sector Heat Recovery
  • Multi-Stage Air Conditioning
  • Precision Dew-Point Feedback
Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

The ultra-low dew point dehumidifier integrates deep precooling, a high-performance desiccant wheel, reactivation heating, purge heat recovery and aftercooling in one modular casing. The purge sector captures heat and moisture profiles that would otherwise limit the wheel at very low outlet humidity. A dedicated dew-point transmitter and modulating controls stabilize dry-air delivery for battery materials and other hygroscopic processes with large recirculation rates.

Các tính năng chính

A high-capacity ceramic-composite rotor is selected for moisture pickup at extremely low vapor pressure.

A purge sector recovers useful heat within the wheel and reduces the reactivation energy required per kilogram of water removed.

Precooling lowers the incoming moisture load before the rotor, while aftercooling delivers air at the required room supply temperature.

PLC sequencing coordinates fans, chilled-water valves, reactivation output, rotor speed and dew-point alarms as one system.

Các mối quan tâm về sản phẩm của khách hàng

Ultra-dry manufacturing combines a very small moisture target with large personnel, infiltration and process loads that change throughout the shift.

A standard rotor stalls above the dew point required by moisture-reactive battery chemistry.The low-dew-point rotor, deep precooling and purge geometry preserve adsorption driving force at very low outlet humidity.
Reactivation heat becomes the dominant utility cost in a continuously occupied dry room.Purge heat recovery and modulating reactivation reduce heater demand during both design and part-load operation.
Door openings create sudden moisture spikes that threaten product exposure limits.Fast dew-point feedback increases dry-air capacity while the large recirculation flow restores the room moisture balance.
Uncoordinated cooling and drying controls cause unstable room temperature.One PLC stages precooling, adsorption and aftercooling to meet dew-point and dry-bulb targets independently.

Các ứng dụng điển hình

Lithium-ion battery electrode dry roomsSolid-state battery research facilitiesMoisture-sensitive electrolyte filling areasPharmaceutical effervescent-product suitesSpecialty chemical powder handling rooms

Thông số kỹ thuật

Representative construction ranges for a modular ultra-low-dew-point air-treatment package are listed below.

Vật liệu lõiHigh-performance ceramic-composite desiccant rotor with mineral-wool-insulated double-skin casing
Độ dày bảng điều khiển50-75 mm thermally broken insulated casing panels
Chiều rộng hiệu quả1600-3800 mm nominal modular unit width
Chiều dài tối đaUp to 8500 mm including precooling rotor reactivation and aftercooling sections
Thép đối mặt với độ dày0.8-1.2 mm pre-painted exterior sheet with galvanized interior liner
Mật độ lõi55-80 kg/m³ typical mineral-wool panel insulation density
Độ dẫn nhiệtApproximately 0.035-0.045 W/(m·K) for mineral-wool panel insulation
Kết thúc bề mặtDurable blue powder-coated exterior panels with galvanized or stainless internal air-path surfaces
Loại khớp nốiBolted structural modules with continuous gaskets, low-leakage dampers and sealed rotor-sector partitions
Tùy chỉnhCó sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Các tùy chọn có sẵn

Steam, gas or electric reactivation energyGreen-purge or power-purge heat-recovery sectionChilled-water or direct-expansion precooling and aftercoolingRedundant process fans and dual dew-point transmitters

Planning a Ultra-Low Dew Point Desiccant Dehumidifier specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi
Email cho chúng tôi WhatsApp WeChat

Trang chủ

Sản phẩm

Tin tức

Về chúng tôi

Liên hệ