Ultra-low dew point desiccant dehumidifier with multiple blue service sections

クリーンルーム HVAC および空気処理装置

超低露点乾燥剤除湿器

A high-performance desiccant air-treatment unit engineered for dry rooms that require stable supply-air dew points below conventional comfort or process ranges.

Ultra-Low Supply Dew Point
Purge-Sector Heat Recovery
Multi-Stage Air Conditioning
Precision Dew-Point Feedback

見積もりリクエスト製品案内

商品紹介

The ultra-low dew point dehumidifier integrates deep precooling, a high-performance desiccant wheel, reactivation heating, purge heat recovery and aftercooling in one modular casing. The purge sector captures heat and moisture profiles that would otherwise limit the wheel at very low outlet humidity. A dedicated dew-point transmitter and modulating controls stabilize dry-air delivery for battery materials and other hygroscopic processes with large recirculation rates.

主要な特徴

A high-capacity ceramic-composite rotor is selected for moisture pickup at extremely low vapor pressure.

A purge sector recovers useful heat within the wheel and reduces the reactivation energy required per kilogram of water removed.

Precooling lowers the incoming moisture load before the rotor, while aftercooling delivers air at the required room supply temperature.

PLC sequencing coordinates fans, chilled-water valves, reactivation output, rotor speed and dew-point alarms as one system.

お客様の製品に関する懸念事項

Ultra-dry manufacturing combines a very small moisture target with large personnel, infiltration and process loads that change throughout the shift.

A standard rotor stalls above the dew point required by moisture-reactive battery chemistry.The low-dew-point rotor, deep precooling and purge geometry preserve adsorption driving force at very low outlet humidity.

Reactivation heat becomes the dominant utility cost in a continuously occupied dry room.Purge heat recovery and modulating reactivation reduce heater demand during both design and part-load operation.

Door openings create sudden moisture spikes that threaten product exposure limits.Fast dew-point feedback increases dry-air capacity while the large recirculation flow restores the room moisture balance.

Uncoordinated cooling and drying controls cause unstable room temperature.One PLC stages precooling, adsorption and aftercooling to meet dew-point and dry-bulb targets independently.

典型的な用途

Lithium-ion battery electrode dry roomsSolid-state battery research facilitiesMoisture-sensitive electrolyte filling areasPharmaceutical effervescent-product suitesSpecialty chemical powder handling rooms

技術的なパラメータ

Representative construction ranges for a modular ultra-low-dew-point air-treatment package are listed below.

コア材料	High-performance ceramic-composite desiccant rotor with mineral-wool-insulated double-skin casing
パネルの厚さ	50-75 mm thermally broken insulated casing panels
有効幅	1600-3800 mm nominal modular unit width
最大長さ	Up to 8500 mm including precooling rotor reactivation and aftercooling sections
鋼鉄の厚さを直面する	0.8-1.2 mm pre-painted exterior sheet with galvanized interior liner
コア密度	55-80 kg/m³ typical mineral-wool panel insulation density
熱伝導率	Approximately 0.035-0.045 W/(m·K) for mineral-wool panel insulation
表面仕上げ	Durable blue powder-coated exterior panels with galvanized or stainless internal air-path surfaces
ジョイントタイプ	Bolted structural modules with continuous gaskets, low-leakage dampers and sealed rotor-sector partitions
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Steam, gas or electric reactivation energyGreen-purge or power-purge heat-recovery sectionChilled-water or direct-expansion precooling and aftercoolingRedundant process fans and dual dew-point transmitters

Planning a Ultra-Low Dew Point Desiccant Dehumidifier specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する