Three-quarter view of targeted molecular chemical filter with perforated metal faces

Воздушные фильтры и химическая фильтрация

Целевой молекулярный химический фильтр

A configurable molecular filter filled with activated alumina, impregnated carbon or blended adsorbents selected for acid gases, bases, oxidants or VOCs.

Target-Specific Adsorbent
Loose-Fill Deep Bed
Vibration-Packed Media
Supply or Exhaust Use

Запрос котировки Просмотреть продукты

Введение продукции

The targeted molecular chemical filter uses a restrained bed of activated alumina, activated carbon or chemically impregnated pellets inside a perforated metal panel or cartridge. Unlike a broad-spectrum odor panel, the media chemistry is selected for the dominant contaminant family: acid gases, ammonia and amines, oxidizing gases, sulfur compounds or VOCs. Vibratory filling produces an even packed bed and reduces settlement voids, while fine retaining screens contain the pellets. Standardized panel or modular cartridge dimensions allow the filter to be used in supply, recirculation and process-exhaust housings.

Основные характеристики

Adsorbent chemistry can be matched to acid, base, sulfur, oxidant or organic molecular contaminants.

Vibration-packed granular media reduces voids that would otherwise create untreated air channels.

Perforated metal faces and fine retaining screens support an even air path through the entire bed.

Refillable metal construction can support scheduled media replacement without discarding the outer frame.

Обеспокоенность клиентов продуктами

Different gaseous contaminants interact with adsorbents in different ways, so a generic carbon panel may leave the dominant corrosive or reactive gas untreated.

Broad-spectrum carbon has limited capacity for the primary acid or basic gas.Impregnated carbon or activated-alumina chemistry is selected for the actual contaminant family.

Granular media settles and leaves a bypass void at the top of the panel.Vibratory filling, internal compression and retaining screens maintain a dense uniform bed.

Fine adsorbent dust migrates downstream toward sensitive equipment.Fine support scrims and a downstream particulate stage retain media fines.

A disposable panel generates unnecessary waste during frequent media changes.A refillable stainless or galvanized cartridge allows the spent pellets to be replaced separately.

Типичные приложения

Corrosion control roomsLaboratory process exhaustWastewater treatment odor controlIndustrial make-up air systemsBattery and chemical production ventilation

Технические параметры

Representative construction ranges for a targeted loose-fill molecular chemical filter are shown below.

Основной материал	Activated alumina, activated carbon, impregnated carbon or blended pelletized molecular adsorbent
Толщина панели	50–300 mm active bed and frame depth
эффективная ширина	300–610 mm nominal panel width
Максимальная длина	Up to 610 mm nominal panel height
Толщина линий стали	0.8–1.2 mm galvanized or stainless perforated-steel cartridge walls
Плотность ядра	Approximately 450–850 kg/m³ bulk density depending on carbon or alumina formulation
Теплопроводимость	Approximately 0.12–0.30 W/(m·K) for the dry granular adsorbent bed
Поверхностная отделка	Mill-galvanized, white powder-coated or brushed stainless-steel cartridge
Объединенный тип	Gasketed panel flange or modular bayonet/cartridge mounting connection
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Broad-spectrum VOC carbonAcid-gas impregnated carbon or aluminaAmmonia and amine targeted mediaRefillable panel or sealed disposable cartridge

Planning a Targeted Molecular Chemical Filter specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой