Three-quarter view of targeted molecular chemical filter with perforated metal faces

Filter udara dan filtrasi kimia

Filter kimia molekuler yang ditargetkan

A configurable molecular filter filled with activated alumina, impregnated carbon or blended adsorbents selected for acid gases, bases, oxidants or VOCs.

Target-Specific Adsorbent
Loose-Fill Deep Bed
Vibration-Packed Media
Supply or Exhaust Use

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The targeted molecular chemical filter uses a restrained bed of activated alumina, activated carbon or chemically impregnated pellets inside a perforated metal panel or cartridge. Unlike a broad-spectrum odor panel, the media chemistry is selected for the dominant contaminant family: acid gases, ammonia and amines, oxidizing gases, sulfur compounds or VOCs. Vibratory filling produces an even packed bed and reduces settlement voids, while fine retaining screens contain the pellets. Standardized panel or modular cartridge dimensions allow the filter to be used in supply, recirculation and process-exhaust housings.

Fitur utama:

Adsorbent chemistry can be matched to acid, base, sulfur, oxidant or organic molecular contaminants.

Vibration-packed granular media reduces voids that would otherwise create untreated air channels.

Perforated metal faces and fine retaining screens support an even air path through the entire bed.

Refillable metal construction can support scheduled media replacement without discarding the outer frame.

Kekhawatiran produk pelanggan

Different gaseous contaminants interact with adsorbents in different ways, so a generic carbon panel may leave the dominant corrosive or reactive gas untreated.

Broad-spectrum carbon has limited capacity for the primary acid or basic gas.Impregnated carbon or activated-alumina chemistry is selected for the actual contaminant family.

Granular media settles and leaves a bypass void at the top of the panel.Vibratory filling, internal compression and retaining screens maintain a dense uniform bed.

Fine adsorbent dust migrates downstream toward sensitive equipment.Fine support scrims and a downstream particulate stage retain media fines.

A disposable panel generates unnecessary waste during frequent media changes.A refillable stainless or galvanized cartridge allows the spent pellets to be replaced separately.

Aplikasi yang Tipis

Corrosion control roomsLaboratory process exhaustWastewater treatment odor controlIndustrial make-up air systemsBattery and chemical production ventilation

Parameter teknis

Representative construction ranges for a targeted loose-fill molecular chemical filter are shown below.

Bahan inti	Activated alumina, activated carbon, impregnated carbon or blended pelletized molecular adsorbent
Ketebalan Panel (Panel Thickness)	50–300 mm active bed and frame depth
Efektif lebar	300–610 mm nominal panel width
Panjang maksimum	Up to 610 mm nominal panel height
Baja menghadap ketebalan	0.8–1.2 mm galvanized or stainless perforated-steel cartridge walls
Kepadatan inti (core density)	Approximately 450–850 kg/m³ bulk density depending on carbon or alumina formulation
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.12–0.30 W/(m·K) for the dry granular adsorbent bed
Permukaan selesai	Mill-galvanized, white powder-coated or brushed stainless-steel cartridge
Jenis Bersama	Gasketed panel flange or modular bayonet/cartridge mounting connection
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Broad-spectrum VOC carbonAcid-gas impregnated carbon or aluminaAmmonia and amine targeted mediaRefillable panel or sealed disposable cartridge

Planning a Targeted Molecular Chemical Filter specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami