Three-quarter view of targeted molecular chemical filter with perforated metal faces

エアフィルターと化学ろ過

対象となる分子化学フィルター半導体クリーンルーム用

A configurable molecular filter filled with activated alumina, impregnated carbon or blended adsorbents selected for acid gases, bases, oxidants or VOCs.

Target-Specific Adsorbent
Loose-Fill Deep Bed
Vibration-Packed Media
Supply or Exhaust Use

見積もりリクエスト製品案内

商品紹介

The targeted molecular chemical filter uses a restrained bed of activated alumina, activated carbon or chemically impregnated pellets inside a perforated metal panel or cartridge. Unlike a broad-spectrum odor panel, the media chemistry is selected for the dominant contaminant family: acid gases, ammonia and amines, oxidizing gases, sulfur compounds or VOCs. Vibratory filling produces an even packed bed and reduces settlement voids, while fine retaining screens contain the pellets. Standardized panel or modular cartridge dimensions allow the filter to be used in supply, recirculation and process-exhaust housings.

主要な特徴

Adsorbent chemistry can be matched to acid, base, sulfur, oxidant or organic molecular contaminants.

Vibration-packed granular media reduces voids that would otherwise create untreated air channels.

Perforated metal faces and fine retaining screens support an even air path through the entire bed.

Refillable metal construction can support scheduled media replacement without discarding the outer frame.

お客様の製品に関する懸念事項

Different gaseous contaminants interact with adsorbents in different ways, so a generic carbon panel may leave the dominant corrosive or reactive gas untreated.

Broad-spectrum carbon has limited capacity for the primary acid or basic gas.Impregnated carbon or activated-alumina chemistry is selected for the actual contaminant family.

Granular media settles and leaves a bypass void at the top of the panel.Vibratory filling, internal compression and retaining screens maintain a dense uniform bed.

Fine adsorbent dust migrates downstream toward sensitive equipment.Fine support scrims and a downstream particulate stage retain media fines.

A disposable panel generates unnecessary waste during frequent media changes.A refillable stainless or galvanized cartridge allows the spent pellets to be replaced separately.

典型的な用途

Corrosion control roomsLaboratory process exhaustWastewater treatment odor controlIndustrial make-up air systemsBattery and chemical production ventilation

技術的なパラメータ

Representative construction ranges for a targeted loose-fill molecular chemical filter are shown below.

コア材料	Activated alumina, activated carbon, impregnated carbon or blended pelletized molecular adsorbent
パネルの厚さ	50–300 mm active bed and frame depth
有効幅	300–610 mm nominal panel width
最大長さ	Up to 610 mm nominal panel height
鋼鉄の厚さを直面する	0.8–1.2 mm galvanized or stainless perforated-steel cartridge walls
コア密度	Approximately 450–850 kg/m³ bulk density depending on carbon or alumina formulation
熱伝導率	Approximately 0.12–0.30 W/(m·K) for the dry granular adsorbent bed
表面仕上げ	Mill-galvanized, white powder-coated or brushed stainless-steel cartridge
ジョイントタイプ	Gasketed panel flange or modular bayonet/cartridge mounting connection
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Broad-spectrum VOC carbonAcid-gas impregnated carbon or aluminaAmmonia and amine targeted mediaRefillable panel or sealed disposable cartridge

Planning a Targeted Molecular Chemical Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する

対象となる分子化学フィルター 半導体クリーンルーム用