English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Изолятор для испытания на стерильность
A closed glove-access isolator arranged for sterility testing workflows, controlled sample entry and separate removal of liquid and solid waste.
- Dedicated Sterility Test Layout
- Dual-Operator Glove Access
- Controlled Sample Transfer
- Separated Waste Removal
Введение продукции
The sterility test isolator separates test samples and media from operators and the surrounding laboratory. One or two glove-access work chambers can support membrane filtration, direct inoculation or compatible rapid methods. Samples enter through a bio-decontamination hatch or rapid transfer port, and liquid and solid waste leave through dedicated closed routes. The chamber uses filtered airflow, welded stainless surfaces and pressure monitoring to maintain the selected test environment and reduce false-positive contamination risk.
Основные характеристики
A dedicated transfer hatch separates load preparation from the main test chamber.
Separate liquid and solid waste interfaces prevent waste crossing the clean sample route.
A common control system monitors pressure, airflow and optional bio-decontamination cycles.
Radiused stainless interiors keep membrane-filtration equipment accessible for cleaning.
Обеспокоенность клиентов продуктами
Sterility testing needs both contamination prevention and a workflow that keeps sample entry, test manipulation and waste removal from crossing each other.
Room-borne contamination creates false-positive test results.A closed filtered chamber and controlled transfer path isolate the test from the laboratory.
Two operators cannot reach the same test setup efficiently.Paired glove positions and a long work zone support parallel manipulation.
Waste removal crosses the incoming sample path.Dedicated liquid and solid waste ports separate egress from sample loading.
Test equipment creates inaccessible surfaces.Removable supports and radiused internal geometry preserve cleaning access.
Типичные приложения
Sterile drug sterility testingMedical-device sterility testingMembrane filtration methodsDirect inoculation procedures
Технические параметры
Typical configurable construction ranges for a sterility test isolator are listed below.
| Основной материал | Fully welded SUS316L test chamber with laminated safety glass and CSM glove-sleeve assemblies |
|---|---|
| Толщина панели | 50-100 mm double-skin chamber and air-handling sections |
| эффективная ширина | 1800-4500 mm usable test-chamber width |
| Максимальная длина | Up to 6500 mm overall isolator length |
| Толщина линий стали | 2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins |
| Плотность ядра | Approximately 8000 kg/m³ for SUS316L chamber material |
| Теплопроводимость | 14-16 W/(m·K) for austenitic stainless steel |
| Поверхностная отделка | Electropolished SUS316L test chamber with welded radiused transitions |
| Объединенный тип | Pressure-tight welded chamber with sealed glove rings, transfer hatch and separate waste interfaces |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Single- or dual-operator chamberIntegrated vapor bio-decontaminationRapid transfer portsMembrane filtration and waste handling modules
Planning a Sterility Test Isolator specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
