Sterility test isolator with dual glove workstations and transfer hatch

層流 · 封じ込め装置

不菌試験のアイソレータ

A closed glove-access isolator arranged for sterility testing workflows, controlled sample entry and separate removal of liquid and solid waste.

Dedicated Sterility Test Layout
Dual-Operator Glove Access
Controlled Sample Transfer
Separated Waste Removal

見積もりリクエスト製品案内

商品紹介

The sterility test isolator separates test samples and media from operators and the surrounding laboratory. One or two glove-access work chambers can support membrane filtration, direct inoculation or compatible rapid methods. Samples enter through a bio-decontamination hatch or rapid transfer port, and liquid and solid waste leave through dedicated closed routes. The chamber uses filtered airflow, welded stainless surfaces and pressure monitoring to maintain the selected test environment and reduce false-positive contamination risk.

主要な特徴

Glove positions are spaced for simultaneous sample opening and test manipulation.

A dedicated transfer hatch separates load preparation from the main test chamber.

Separate liquid and solid waste interfaces prevent waste crossing the clean sample route.

A common control system monitors pressure, airflow and optional bio-decontamination cycles.

Radiused stainless interiors keep membrane-filtration equipment accessible for cleaning.

お客様の製品に関する懸念事項

Sterility testing needs both contamination prevention and a workflow that keeps sample entry, test manipulation and waste removal from crossing each other.

Room-borne contamination creates false-positive test results.A closed filtered chamber and controlled transfer path isolate the test from the laboratory.

Two operators cannot reach the same test setup efficiently.Paired glove positions and a long work zone support parallel manipulation.

Waste removal crosses the incoming sample path.Dedicated liquid and solid waste ports separate egress from sample loading.

Test equipment creates inaccessible surfaces.Removable supports and radiused internal geometry preserve cleaning access.

典型的な用途

Sterile drug sterility testingMedical-device sterility testingMembrane filtration methodsDirect inoculation procedures

技術的なパラメータ

Typical configurable construction ranges for a sterility test isolator are listed below.

コア材料	Fully welded SUS316L test chamber with laminated safety glass and CSM glove-sleeve assemblies
パネルの厚さ	50-100 mm double-skin chamber and air-handling sections
有効幅	1800-4500 mm usable test-chamber width
最大長さ	Up to 6500 mm overall isolator length
鋼鉄の厚さを直面する	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
コア密度	Approximately 8000 kg/m³ for SUS316L chamber material
熱伝導率	14-16 W/(m·K) for austenitic stainless steel
表面仕上げ	Electropolished SUS316L test chamber with welded radiused transitions
ジョイントタイプ	Pressure-tight welded chamber with sealed glove rings, transfer hatch and separate waste interfaces
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single- or dual-operator chamberIntegrated vapor bio-decontaminationRapid transfer portsMembrane filtration and waste handling modules

Planning a Sterility Test Isolator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する