Forty-compartment electropolished stainless cleanroom shoe rack

Мебель для чистых комнат и изделия из нержавеющей стали

Нержавеющая сталь обувный полк

An electropolished Type 304 stainless wire rack with 40 divided shoe compartments, ten storage rows and open front-and-back access for cleanroom gowning areas.

Forty divided shoe compartments
Ten open storage rows
Two-sided gowning-room access
Electropolished Type 304 wire

Запрос котировки Просмотреть продукты

Введение продукции

The stainless steel shoe rack organizes forty pairs of clean footwear in a shallow open-wire frame measuring approximately 356 mm deep. Eleven horizontal wire shelves create ten storage rows, and stainless divider rods with formed tabs split each row into four equal compartments. The 165 mm vertical pitch accommodates common cleanroom shoes while keeping every pair visible from the front or back. Electropolished Type 304 posts and shelf wires expose minimal horizontal area to room airflow. Threaded leveling bolts stabilize the tall 914 mm-wide rack without closing the floor zone beneath it.

Основные характеристики

Forty fixed compartments give each footwear pair a repeatable location without using enclosed bins or doors.

A shallow 356 mm depth and access from both faces allow the rack to serve a gowning-room boundary without blocking the aisle.

Open wire shelves, rods and tabs support footwear while leaving room air and cleaning spray paths unobstructed.

Removing selected divider rods or shelf levels creates taller positions for clean boots while retaining the same four-post frame.

Обеспокоенность клиентов продуктами

High-volume gowning areas need individually visible footwear positions without enclosed cubbies that obstruct airflow or trap debris.

Shoes stored in open piles become mixed and consume valuable gowning-room floor space.Ten rows divided into four positions provide forty consistent pair locations in a narrow vertical footprint.

Closed cubbies conceal debris and restrict air movement around damp footwear.Electropolished wire shelves and rod dividers keep the storage volume open from both sides.

Single-sided racks create congestion when personnel enter and exit through adjacent gowning zones.The shallow frame is accessible from the front and back so pairs can be reached from either aisle.

Uniform low compartments cannot accommodate occasional clean boots.Selected divider rods or shelf levels can be omitted to form taller locations within the modular post structure.

Типичные приложения

Cleanroom gowning-room shoe organizationPharmaceutical personnel entrancesBiotechnology change areasMedical-device footwear stagingLaboratory clean-zone access points

Технические параметры

Typical configurable specifications for a 40-compartment stainless cleanroom shoe rack are listed below.

Основной материал	Type 304 stainless four-post frame with 11 electropolished wire shelves, divider rods, formed tabs and threaded leveling bolts
Толщина панели	3.0 mm shelf wire with 6.0 mm perimeter and divider rods
эффективная ширина	914 mm overall rack width
Максимальная длина	2210 mm maximum overall height including leveling bolts
Толщина линий стали	1.5 mm wall thickness for 25 mm Type 304 stainless tubular posts
Плотность ядра	7900–8000 kg/m³ for Type 304 stainless steel
Теплопроводимость	14–17 W/(m·K) for Type 304 stainless steel
Поверхностная отделка	Bright electropolished Type 304 stainless shelves, posts, divider rods and formed tabs
Объединенный тип	Tapered shelf collars on split post sleeves with fixed rod-and-tab compartment dividers, 165 mm row spacing and threaded leveling bolts
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

50-, 60- or 80-compartment widthsTaller clean-boot openingsNumbered blue compartment tagsStainless wall or floor anchoring brackets

Planning a Stainless Steel Shoe Rack specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой