Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Rack de chaussures en acier inoxydable
An electropolished Type 304 stainless wire rack with 40 divided shoe compartments, ten storage rows and open front-and-back access for cleanroom gowning areas.
- Forty divided shoe compartments
- Ten open storage rows
- Two-sided gowning-room access
- Electropolished Type 304 wire
Introduction de produit
The stainless steel shoe rack organizes forty pairs of clean footwear in a shallow open-wire frame measuring approximately 356 mm deep. Eleven horizontal wire shelves create ten storage rows, and stainless divider rods with formed tabs split each row into four equal compartments. The 165 mm vertical pitch accommodates common cleanroom shoes while keeping every pair visible from the front or back. Electropolished Type 304 posts and shelf wires expose minimal horizontal area to room airflow. Threaded leveling bolts stabilize the tall 914 mm-wide rack without closing the floor zone beneath it.
Key Features
A shallow 356 mm depth and access from both faces allow the rack to serve a gowning-room boundary without blocking the aisle.
Open wire shelves, rods and tabs support footwear while leaving room air and cleaning spray paths unobstructed.
Removing selected divider rods or shelf levels creates taller positions for clean boots while retaining the same four-post frame.
Préoccupations du client produit
High-volume gowning areas need individually visible footwear positions without enclosed cubbies that obstruct airflow or trap debris.
Shoes stored in open piles become mixed and consume valuable gowning-room floor space.Ten rows divided into four positions provide forty consistent pair locations in a narrow vertical footprint.
Closed cubbies conceal debris and restrict air movement around damp footwear.Electropolished wire shelves and rod dividers keep the storage volume open from both sides.
Single-sided racks create congestion when personnel enter and exit through adjacent gowning zones.The shallow frame is accessible from the front and back so pairs can be reached from either aisle.
Uniform low compartments cannot accommodate occasional clean boots.Selected divider rods or shelf levels can be omitted to form taller locations within the modular post structure.
Les applications typiques
Cleanroom gowning-room shoe organizationPharmaceutical personnel entrancesBiotechnology change areasMedical-device footwear stagingLaboratory clean-zone access points
Paramètres techniques
Typical configurable specifications for a 40-compartment stainless cleanroom shoe rack are listed below.
| Matériaux de base | Type 304 stainless four-post frame with 11 electropolished wire shelves, divider rods, formed tabs and threaded leveling bolts |
|---|---|
| Panneau épaisseur | 3.0 mm shelf wire with 6.0 mm perimeter and divider rods |
| Largeur effective | 914 mm overall rack width |
| Longueur maximale | 2210 mm maximum overall height including leveling bolts |
| Acier face épaisseur | 1.5 mm wall thickness for 25 mm Type 304 stainless tubular posts |
| Densité Core | 7900 - 8000 kg / m3 pour l'acier inoxydable de type 304 |
| Conductivité thermique | 14 - 17 W / (m · K) pour l'acier inoxydable de type 304 |
| surface finie | Bright electropolished Type 304 stainless shelves, posts, divider rods and formed tabs |
| Type joint | Tapered shelf collars on split post sleeves with fixed rod-and-tab compartment dividers, 165 mm row spacing and threaded leveling bolts |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
50-, 60- or 80-compartment widthsTaller clean-boot openingsNumbered blue compartment tagsStainless wall or floor anchoring brackets
Planning a Stainless Steel Shoe Rack specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
