Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Muebles de sala limpia y productos de acero inoxidable
Acero inoxidable Shoe Rack
An electropolished Type 304 stainless wire rack with 40 divided shoe compartments, ten storage rows and open front-and-back access for cleanroom gowning areas.
- Forty divided shoe compartments
- Ten open storage rows
- Two-sided gowning-room access
- Electropolished Type 304 wire
Introducción del producto
The stainless steel shoe rack organizes forty pairs of clean footwear in a shallow open-wire frame measuring approximately 356 mm deep. Eleven horizontal wire shelves create ten storage rows, and stainless divider rods with formed tabs split each row into four equal compartments. The 165 mm vertical pitch accommodates common cleanroom shoes while keeping every pair visible from the front or back. Electropolished Type 304 posts and shelf wires expose minimal horizontal area to room airflow. Threaded leveling bolts stabilize the tall 914 mm-wide rack without closing the floor zone beneath it.
Características clave
A shallow 356 mm depth and access from both faces allow the rack to serve a gowning-room boundary without blocking the aisle.
Open wire shelves, rods and tabs support footwear while leaving room air and cleaning spray paths unobstructed.
Removing selected divider rods or shelf levels creates taller positions for clean boots while retaining the same four-post frame.
Preocupaciones del producto del cliente
High-volume gowning areas need individually visible footwear positions without enclosed cubbies that obstruct airflow or trap debris.
Shoes stored in open piles become mixed and consume valuable gowning-room floor space.Ten rows divided into four positions provide forty consistent pair locations in a narrow vertical footprint.
Closed cubbies conceal debris and restrict air movement around damp footwear.Electropolished wire shelves and rod dividers keep the storage volume open from both sides.
Single-sided racks create congestion when personnel enter and exit through adjacent gowning zones.The shallow frame is accessible from the front and back so pairs can be reached from either aisle.
Uniform low compartments cannot accommodate occasional clean boots.Selected divider rods or shelf levels can be omitted to form taller locations within the modular post structure.
Aplicaciones típicas
Cleanroom gowning-room shoe organizationPharmaceutical personnel entrancesBiotechnology change areasMedical-device footwear stagingLaboratory clean-zone access points
Parámetros técnicos
Typical configurable specifications for a 40-compartment stainless cleanroom shoe rack are listed below.
| Materiales Core | Type 304 stainless four-post frame with 11 electropolished wire shelves, divider rods, formed tabs and threaded leveling bolts |
|---|---|
| Panel de espesor | 3.0 mm shelf wire with 6.0 mm perimeter and divider rods |
| Ancho efectivo | 914 mm overall rack width |
| Longitud máxima | 2210 mm maximum overall height including leveling bolts |
| Acero frente a espesor | 1.5 mm wall thickness for 25 mm Type 304 stainless tubular posts |
| Densidad Core | 7900 - 8000 kg / m3 para acero inoxidable tipo 304 |
| Conductividad térmica | 14 - 17 W / (m · K) para el acero inoxidable tipo 304 |
| Superficie acabada | Bright electropolished Type 304 stainless shelves, posts, divider rods and formed tabs |
| Tipo conjunto | Tapered shelf collars on split post sleeves with fixed rod-and-tab compartment dividers, 165 mm row spacing and threaded leveling bolts |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
50-, 60- or 80-compartment widthsTaller clean-boot openingsNumbered blue compartment tagsStainless wall or floor anchoring brackets
Planning a Stainless Steel Shoe Rack specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
