English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Приборы для испытаний и валидации в чистых помещениях
Испытатель воздухонепроницаемости комнаты
A modular blower-door room airtightness tester with adjustable doorway panel, calibrated fan and dual-channel pressure/flow gauge.
- Temporary adjustable doorway sealing system.
- Calibrated reversible fan with multiple flow ranges.
- Dual-channel multipoint airtightness testing.
Введение продукции
This tester temporarily seals a doorway with an adjustable fabric panel and installs a calibrated variable-speed fan in the lower opening. The fan pressurizes or depressurizes the room while a dual-channel gauge monitors enclosure pressure and fan flow. Multiple pressure points can be used to derive leakage flow and an airtightness curve for cleanrooms, containment rooms and protected enclosures.
Основные характеристики
Reversible calibrated fan provides pressurization or depressurization.
Interchangeable flow rings extend useful airflow measurement range.
Dual-channel gauge displays enclosure pressure and leakage flow.
Automatic pressure stepping supports repeatable multipoint testing.
Modular components pack into transport bags for field use.
Обеспокоенность клиентов продуктами
Room leakage must be measured over a controlled pressure range despite differing doorway sizes, environmental baselines and widely varying enclosure tightness.
Door openings differ between rooms and projects.The telescopic frame and flexible panel adjust to a practical range of doorway dimensions.
One fan range cannot measure both tight and leaky rooms accurately.Interchangeable calibrated flow rings adapt the fan to different leakage levels.
Wind and stack pressure bias a single reading.Baseline capture and multipoint testing distinguish environmental offset from fan-induced pressure.
Large test assemblies are difficult to transport and install.The collapsible frame, fabric panel, fan and gauge pack into modular carrying bags.
Типичные приложения
Cleanroom enclosure airtightness testsContainment room leakage evaluationAirlock envelope diagnosticsProtected enclosure integrity testingCommissioning before pressure balancing
Технические параметры
Representative blower-door assembly materials and dimensions are listed below; panel size, fan capacity and flow-ring set can be selected for room volume and expected leakage.
| Основной материал | Aluminum doorway frame, coated nylon panel, calibrated fan and digital pressure gauge |
|---|---|
| Толщина панели | Typically 0.4-0.8 mm for the coated fabric doorway panel |
| эффективная ширина | Approximately 700-1200 mm adjustable doorway span |
| Максимальная длина | Approximately 2000-2600 mm adjustable frame height |
| Толщина линий стали | Typically 0.8-1.5 mm for fan guard and mounting hardware |
| Плотность ядра | Approximately 2700 kg/m³ for aluminum frame components |
| Теплопроводимость | Approximately 160-205 W/(m·K) for aluminum frame components |
| Поверхностная отделка | Red coated fabric panel, black calibrated fan and anodized aluminum frame |
| Объединенный тип | Telescopic frame clamps with zippered fan opening and color-coded pressure tubing |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Single- or multi-fan configurationAlternative doorway frame sizesMultiple calibrated flow ringsWireless pressure gaugeAutomated test softwareProtective transport bags
Planning a Room Airtightness Tester specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
