Room airtightness tester complete doorway assembly in three-quarter view

Instrumen pengujian dan validasi ruang bersih

Kamar Airtightness Tester

A modular blower-door room airtightness tester with adjustable doorway panel, calibrated fan and dual-channel pressure/flow gauge.

Temporary adjustable doorway sealing system.
Calibrated reversible fan with multiple flow ranges.
Dual-channel multipoint airtightness testing.

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This tester temporarily seals a doorway with an adjustable fabric panel and installs a calibrated variable-speed fan in the lower opening. The fan pressurizes or depressurizes the room while a dual-channel gauge monitors enclosure pressure and fan flow. Multiple pressure points can be used to derive leakage flow and an airtightness curve for cleanrooms, containment rooms and protected enclosures.

Fitur utama:

Adjustable frame and fabric panel form a temporary doorway seal.

Reversible calibrated fan provides pressurization or depressurization.

Interchangeable flow rings extend useful airflow measurement range.

Dual-channel gauge displays enclosure pressure and leakage flow.

Automatic pressure stepping supports repeatable multipoint testing.

Modular components pack into transport bags for field use.

Kekhawatiran produk pelanggan

Room leakage must be measured over a controlled pressure range despite differing doorway sizes, environmental baselines and widely varying enclosure tightness.

Door openings differ between rooms and projects.The telescopic frame and flexible panel adjust to a practical range of doorway dimensions.

One fan range cannot measure both tight and leaky rooms accurately.Interchangeable calibrated flow rings adapt the fan to different leakage levels.

Wind and stack pressure bias a single reading.Baseline capture and multipoint testing distinguish environmental offset from fan-induced pressure.

Large test assemblies are difficult to transport and install.The collapsible frame, fabric panel, fan and gauge pack into modular carrying bags.

Aplikasi yang Tipis

Cleanroom enclosure airtightness testsContainment room leakage evaluationAirlock envelope diagnosticsProtected enclosure integrity testingCommissioning before pressure balancing

Parameter teknis

Representative blower-door assembly materials and dimensions are listed below; panel size, fan capacity and flow-ring set can be selected for room volume and expected leakage.

Bahan inti	Aluminum doorway frame, coated nylon panel, calibrated fan and digital pressure gauge
Ketebalan Panel (Panel Thickness)	Typically 0.4-0.8 mm for the coated fabric doorway panel
Efektif lebar	Approximately 700-1200 mm adjustable doorway span
Panjang maksimum	Approximately 2000-2600 mm adjustable frame height
Baja menghadap ketebalan	Typically 0.8-1.5 mm for fan guard and mounting hardware
Kepadatan inti (core density)	Approximately 2700 kg/m³ for aluminum frame components
Konduktivitas Termal (Thermal Conductivity)	Approximately 160-205 W/(m·K) for aluminum frame components
Permukaan selesai	Red coated fabric panel, black calibrated fan and anodized aluminum frame
Jenis Bersama	Telescopic frame clamps with zippered fan opening and color-coded pressure tubing
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Single- or multi-fan configurationAlternative doorway frame sizesMultiple calibrated flow ringsWireless pressure gaugeAutomated test softwareProtective transport bags

Planning a Room Airtightness Tester specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami