Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum-Test - und Validierungsinstrumente
Raumluftdichtigkeit Tester
A modular blower-door room airtightness tester with adjustable doorway panel, calibrated fan and dual-channel pressure/flow gauge.
- Temporary adjustable doorway sealing system.
- Calibrated reversible fan with multiple flow ranges.
- Dual-channel multipoint airtightness testing.
Produkteinführung
This tester temporarily seals a doorway with an adjustable fabric panel and installs a calibrated variable-speed fan in the lower opening. The fan pressurizes or depressurizes the room while a dual-channel gauge monitors enclosure pressure and fan flow. Multiple pressure points can be used to derive leakage flow and an airtightness curve for cleanrooms, containment rooms and protected enclosures.
Key Features
Reversible calibrated fan provides pressurization or depressurization.
Interchangeable flow rings extend useful airflow measurement range.
Dual-channel gauge displays enclosure pressure and leakage flow.
Automatic pressure stepping supports repeatable multipoint testing.
Modular components pack into transport bags for field use.
Kunden Produktbedenken
Room leakage must be measured over a controlled pressure range despite differing doorway sizes, environmental baselines and widely varying enclosure tightness.
Door openings differ between rooms and projects.The telescopic frame and flexible panel adjust to a practical range of doorway dimensions.
One fan range cannot measure both tight and leaky rooms accurately.Interchangeable calibrated flow rings adapt the fan to different leakage levels.
Wind and stack pressure bias a single reading.Baseline capture and multipoint testing distinguish environmental offset from fan-induced pressure.
Large test assemblies are difficult to transport and install.The collapsible frame, fabric panel, fan and gauge pack into modular carrying bags.
Typische Anwendungen
Cleanroom enclosure airtightness testsContainment room leakage evaluationAirlock envelope diagnosticsProtected enclosure integrity testingCommissioning before pressure balancing
Technische Parameter
Representative blower-door assembly materials and dimensions are listed below; panel size, fan capacity and flow-ring set can be selected for room volume and expected leakage.
| Core Material | Aluminum doorway frame, coated nylon panel, calibrated fan and digital pressure gauge |
|---|---|
| Panel Dicke | Typically 0.4-0.8 mm for the coated fabric doorway panel |
| Effektive Breite | Approximately 700-1200 mm adjustable doorway span |
| Maximale Länge | Approximately 2000-2600 mm adjustable frame height |
| Stahl facing Dicke | Typically 0.8-1.5 mm for fan guard and mounting hardware |
| Kerndichte | Approximately 2700 kg/m³ for aluminum frame components |
| Thermische Leitfähigkeit | Approximately 160-205 W/(m·K) for aluminum frame components |
| Oberfläche Finish | Red coated fabric panel, black calibrated fan and anodized aluminum frame |
| Gemeinsamer Typ | Telescopic frame clamps with zippered fan opening and color-coded pressure tubing |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Single- or multi-fan configurationAlternative doorway frame sizesMultiple calibrated flow ringsWireless pressure gaugeAutomated test softwareProtective transport bags
Planning a Room Airtightness Tester specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
