Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Habitación Airtight Tester
A modular blower-door room airtightness tester with adjustable doorway panel, calibrated fan and dual-channel pressure/flow gauge.
- Temporary adjustable doorway sealing system.
- Calibrated reversible fan with multiple flow ranges.
- Dual-channel multipoint airtightness testing.
Introducción del producto
This tester temporarily seals a doorway with an adjustable fabric panel and installs a calibrated variable-speed fan in the lower opening. The fan pressurizes or depressurizes the room while a dual-channel gauge monitors enclosure pressure and fan flow. Multiple pressure points can be used to derive leakage flow and an airtightness curve for cleanrooms, containment rooms and protected enclosures.
Características clave
Reversible calibrated fan provides pressurization or depressurization.
Interchangeable flow rings extend useful airflow measurement range.
Dual-channel gauge displays enclosure pressure and leakage flow.
Automatic pressure stepping supports repeatable multipoint testing.
Modular components pack into transport bags for field use.
Preocupaciones del producto del cliente
Room leakage must be measured over a controlled pressure range despite differing doorway sizes, environmental baselines and widely varying enclosure tightness.
Door openings differ between rooms and projects.The telescopic frame and flexible panel adjust to a practical range of doorway dimensions.
One fan range cannot measure both tight and leaky rooms accurately.Interchangeable calibrated flow rings adapt the fan to different leakage levels.
Wind and stack pressure bias a single reading.Baseline capture and multipoint testing distinguish environmental offset from fan-induced pressure.
Large test assemblies are difficult to transport and install.The collapsible frame, fabric panel, fan and gauge pack into modular carrying bags.
Aplicaciones típicas
Cleanroom enclosure airtightness testsContainment room leakage evaluationAirlock envelope diagnosticsProtected enclosure integrity testingCommissioning before pressure balancing
Parámetros técnicos
Representative blower-door assembly materials and dimensions are listed below; panel size, fan capacity and flow-ring set can be selected for room volume and expected leakage.
| Materiales Core | Aluminum doorway frame, coated nylon panel, calibrated fan and digital pressure gauge |
|---|---|
| Panel de espesor | Typically 0.4-0.8 mm for the coated fabric doorway panel |
| Ancho efectivo | Approximately 700-1200 mm adjustable doorway span |
| Longitud máxima | Approximately 2000-2600 mm adjustable frame height |
| Acero frente a espesor | Typically 0.8-1.5 mm for fan guard and mounting hardware |
| Densidad Core | Approximately 2700 kg/m³ for aluminum frame components |
| Conductividad térmica | Approximately 160-205 W/(m·K) for aluminum frame components |
| Superficie acabada | Red coated fabric panel, black calibrated fan and anodized aluminum frame |
| Tipo conjunto | Telescopic frame clamps with zippered fan opening and color-coded pressure tubing |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single- or multi-fan configurationAlternative doorway frame sizesMultiple calibrated flow ringsWireless pressure gaugeAutomated test softwareProtective transport bags
Planning a Room Airtightness Tester specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
